Q-See QR404 user manual Password, Video Setup, Language, Info, System Maintenance

(Picture 61)

(Picture 62)

(Picture 63)

(Picture 64)

(Picture 65)

5.2.8.2: Password

Click on [Main menuSystemPassword] to adjust your system’s password settings. This will generate a Password Setup dialog box that will allow you to enable or disable password protection and also set up an administrator password (Picture 61). Turning your Password Enable setting to “On” will generate a User Password field and Administrator Password field to populate. The password option supports up to 6 characters.

5.2.8.3: Video Setup

Click on [Main menuSystemVID] to adjust your system’s video preferences. This will generate a Video Setup dialog box (Picture 62) where you can set your Video System settings to PAL or NTSC (NTSC is standard in the USA). You can also adjust your VGA Resolution settings from the VGA RESOLUTION drop down menu giving you the ability to choose from 1280x1024, 1024x768 or 800x600 for the VGA out port.

5.2.8.4: Language

Click on [Main menuSystemLanguage] to adjust your system’s Language preferences. The [System Language] menu will appear as illustrated in Picture 63. Choose the language you want to use on your DVR from the drop down menu then click [APPLY] button. The selection will be available after system Auto restarts.

5.2.8.5: Info

Click the [Main menuSystemInfo] to view your system’s device type, software version and your MAC address.

5.2.8.6: System Maintenance

Click the [Main menuSystemMaintain] to access the System Maintain menu as shown in Picture 65. This menu allows you to reset the DVR to factory default settings, update system software (firmware), and set system auto-maintenance. Setting your Auto Maintain option to “On” in the drop down menu will set your DVR to automatically check for updates on restart and you can also update your system manually by clicking on the [System Update] button. Please note that you must click on the [Apply] button in order for any changes to take effect.