Q-See QR404 user manual Net-Viewer Program, Enable Plug-Ins and Log-In to Net-Viewer

QR404 User Manual

Chapter 6: Net-Viewer Program

6.1: Enable Plug-Ins and Log-In to Net-Viewer

	Refer to Section 5.2.3.5 to ensure that your pop-up blockers are
	turned off and your ActiveX is enabled prior to running the
	Net-Viewer program. Once you have disabled your pop-up block
	option and enabled ActiveX, open an IE Browser window and input
	the IP address and web port of your DVR (i.e., http://172.18.6.202/)
	into the address bar. This will generate a Net-Viewer log in screen
	(Picture 69) prompting you to input the necessary information
(Picture 71)	required to view a live video feed from your DVR system. If you are
(Picture 69)	experiencing difficulties initiating the log in screen, make sure your
	browser’s safety level or firewall settings are not set too high. Refer

to section 5.2.3 Network Setup to ensure that your network configuration is correct, your system ports are forwarded correctly and ActiveX is enabled. Once you have entered in the correct information, you will be able to view your DVR remotely through the Net-Viewer program and you will see a live feed similar to the one depicted in Picture 70.

6.2: Main Interface of Net-Viewer

(Picture 70)

Refer to Section 6.2.2 for a more detailed description of the actions associated with the specific buttons of the Net-Viewer illustrated above (Picture 70). However, a general description of the buttons is as follows:

1 – Menu Bar

2 – PTZ Panning Options

3 Through 4 – PTZ View Options

5 Through 9 – Live Play Controls

31