SunBriteTV SB-6560HD-WH, SB-6560HD-SL, SB-6560HD-BL TV Installation Rear Panel Connection Diagrams

TV Installation – Rear Panel Connection Diagrams

CONNECTING TO A SATELLITE OR CABLE SET-TOP BOX (Continued)
Connecting with S-Video (Fair)	Connecting with
	Composite (Fair)

1.Make sure the power of the TV and your DVD player is turned off.

2.Obtain an S-Video Cable. Connect the S-Video connector to both your DVD player and Composite’s S-Video connector port off the back of your MODEL 6560HD.

3.Obtain a RCA Audio Cable. Connect the white color connector to both your DVD player and Composite’s white connector port off the back of your MODEL 6560HD.

4.Connect the red color connector to both your DVD player and Composite’s red connector port off the back of your TV.

5.Turn on the TV and your DVD player.

6.Use the remote control’s source button or the source button on the right side of the TV to switch to AV1 (S-Video).

Please Note :

1.If AV 1 is already occupied, use AV 2 as your connection port and switch source to AV 2 (S-Video).

2.Refer to the set-top box’s manual to make sure the set-top box is configured to output correctly to the TV.

3.SunBriteTV’s MODEL 6560HD supports SONY’s universal remote code. Please look up SONY’s codes in your universal remote’s hand book.

4.This TV will turn off automatically if there’s no signal present for more than 15 minutes.

1.Make sure the power of the TV and your DVD player is turned off.

2.Obtain a Yellow Video Cable. Connect the Yellow Video connector to both your DVD player and Composite’s Yellow Video connector port off the back of your TV.

3.Obtain a RCA Audio Cable. Connect the white color connector to both your DVD player and Composite’s white connector port off the back of your TV.

4.Connect the red color connector to both your DVD player and Composite’s red connector port off the back of your TV.

5.Turn on the TV and your DVD player.

6.Use the remote control’s source button or the source button on the right side of the TV to switch to AV1 (CVBS).

Please Note :

1.If AV 1 is already occupied, use AV 2 as your connection port and switch source to AV 2 (S-Video).

2.Refer to the set-top box’s manual to make sure the set-top box is configured to output correctly to the TV.

3.SunBriteTV’s MODEL 6560HD supports SONY’s universal remote code. Please look up SONY’s codes in your universal remote’s hand book.

4.This TV will turn off automatically if there’s no signal present for more than 15 minutes.

SunBriteTV Model SB-6560HD Operator’s Manual Page 15