SunBriteTV SB-6560HD-BL, SB-6560HD-WH, SB-6560HD-SL manual Adjusting On-Screen Displays Setup Menu

Adjusting On-Screen Displays – Setup Menu

Setup Menu

1.Press qp buttons to move the cursor to the item to be selected.

2.Press t u buttons to make the desired adjustments.

3. When you are satisfied with your adjustments, press MENU or EXIT to exit the main menu.

Setup Menu

Advanced Sub Menu

Page 24

Menu language

Press qp buttons to Menu Language, then use t

ubuttons to select menu language, the options are English / French / Spanish.

Transparency

Press qp buttons to Transparency, then use t u buttons to select Transparency ON or OFF.

Zoom Mode

Press qp buttons to Zoom Mode, then use t u buttons to select current zoom mode, the options are Normal / Wide / Zoom / Cinema.

Noise Reduction

Press qp buttons to Noise Reduction, then use t u buttons to select current noise reduction level, the options are off / Weak / Middle / Strong.

Advanced

Press qp buttons to Advanced, then press u button to enter the Advanced Sub Menu shown below Note: This item is only available in VGA source input.

H-Pos

Press qp buttons and then use t u adjust the horizontal position of the picture (this function is to adjust the picture to Left/Right as to your preference).

V-Pos

Press qp buttons and then use t u adjust the vertical position of the picture (to adjust the picture to Left/Right as to your preference).

Clock

Press qp buttons and then use t u to adjust the clock of the picture. (This function is to minimize any vertical bars or stripes visible on the background screen. The horizontal screen size will also change.

Phase

Press qp buttons and then use t u to adjust the phase of the picture. (This function allows you to remove any horizontal noise and to sharpen the image of characters).

Auto

Press qp buttons and then press OK button to perform the Auto Adjust function that automatically adjusts the available options for the best viewing configuration.