Energy Speaker Systems LTV46DA manual Additional Picture Settings, Set Individual Colour Channels

Page 28

Settings

➣Additional Picture Settings

Use this functions to adjust the picture settings individually, if you have selected the picture mode Custom.

Picture

Audio

Timer

Install

Setup

Option

ModeStandard

Brightness050

Contrast050

Sharpness050

Colour050

Tint050

Colour Temperature

1Press . To return to the main menu, press

several times.

2	Press	or	and select PICTURE.
3	Press	or	to select the desired menu.

4Press to open the desired menu.

5 Press

or

to select the desired setting.

6Press to save the settings. The settings will be saved in the picture mode Custom.

Position OK: SelectMENU/EXIT: Exit

The following settings are available:

Brightness: Brightness of the picture

Contrast: Contrast of the picture

Sharpness: Sharpens the edges of the objects

Colour:	Adjusts the intensity of the colours
Tint:	Sets the hue

➣Set Individual Colour Channels

Use this function to adjust the intensity of the individual colour channels.


		Picture	Audio		Timer		Install	Setup	Option

		Mode	Standard

		Brightness	050

		Contrast	050

		Sharpness	050

		Colour	050

		Tint	050
					Colour Temperature
		Colour Temperature			Colour Temperature
					Temperature
					Red		50
					Green		50
					Blue		50

1Press . To return to the main menu, press

several times.

2	Press	or	and select PICTURE.
3	Press	or	and select COLOUR

TEMPERATURE.

4Press .

5 Press or

to select the desired setting.

6Press to save the settings.

The following settings are available: Red/Green/Blue

Move

Adjust

MENU: Previous

EXIT: Exit

26

Image 28

Contents LTV46DA Page Content Reduce Noise Channel Groups Conformity DisposalUnpacking and Setup SafetyUnit Remote control Batteries Mains cable Scope of SupplyUnpacking and Setup Location Intended purposeFront View Viewing the Control PanelsRear View Remote Control Connecting to a Device with Scart Socket Connecting to two Devices with Scart SocketConnections and Start of Operation Connections for TV ReceptionConnecting to the Roof Aerial Connecting to a Device without Scart SocketConnecting to Cable Reception Connecting to HeadphonesConnecting Camcorders and Video Games Connecting Camcorders and Video Games by AV CableConnecting Camcorders and Video Games by Scart Cable Connecting Camcorders and Video Games by S-Video CableWith the output sockets of the external devices Connecting to External Devices with Component Input Connecting to a ComputerAV 3 or AV 4 on the television set Connecting the Digital Audio Output Connecting Several DevicesConnecting Mains Cable Connecting to the Hdmi ConnectionConnecting HDMI/DVI Cable Inserting the BatteriesSettings Switching OnSwitching Off Setting up for OperationTuning Starting Automatic Tuning TV StationsOpen, Select and Close Menus PressChange channel Use this function to set the channel for individual stationsSet System Set Colour SystemPress . To return to the main menu, press Several times Fine Tuning Manual TuningUse this function to tune the channels manually Sound Settings Change Channel NameUnit can record and play back stereo sounds Press or Select NameImprove Signal Quality Use this function to improve poor signal qualityPress Select Install or Adjust the settings Press to save the settingsReduce Noise Channel GroupsWatch Favourite Channel Use this function to reduce picture noiseSet Aspect Ratio Set Screen LanguageSet Wide Screen Format Set Picture Mode Display if no Wide Screen Signal is ReceivedSet Individual Colour Channels Additional Picture SettingsPress to open the desired menu Audio Settings Adjust Individual Audio FrequenciesSet volume Set BalanceAdjust Medium and Low Frequencies Is a registered trademarkSet Sound Source Enter the time using the key pad Press to save the settingsSet Time Set Switch on Time Use this function to set a time when the unit turns onSet Time by Station Press Select on or OFF orSet Switch off Time Automatic Switch offAutomatic Switch off if no Signal is Received Use this function to set a time when the unit turns offSet On-Screen Display Switch Off if no Key is PressedSet Duration Set Transparency Child LockActivate Child Lock Restore Default Settings for the ComputerPress Press the mains switch on the back of the unit Set Characters for TeletextWatching Set VolumeWatch Current Television Program Recall a Favourite Channel Select SourceSelect Input Press Press repeatedly until you select the desired channelWatch Two Programs at the Same Time PIP Set Picture-in-Picture Size Set Picture-in-Picture PositionTeletext Use this function to set the size of the small pictureSet Picture Mode while Watching Adjust Picture Size while WatchingStill Picture Show TimeSet Sound Effect while Watching Set Sound while WatchingSet Stereo/Mono while Watching Use this function to set the sound effectsCleaning and Troubleshooting Cast in black and white. Adjust the colour settings See chapter Restore Default onCheck wether the connecting cable is properly connected to Cannot be displayed. Change the settings in the computerTechnical specifications Pixel TypePb/Pr 1360 xMemo Memo Memo