Energy Speaker Systems LTV46DA Cast in black and white. Adjust the colour settings, Computer on

Page 44

Cleaning and Troubleshooting

Some Channels Display Black and	Check if other channels display colours. If yes, the program is broad-
White	cast in black and white. Adjust the colour settings.

Snow on one or Several Channels	Check whether the antenna cable is in proper condition and if it is
	connected to the respective sockets. See chapter “Connecting a
	Satellite Receiver, a Set Top Box or a Video Recorder” on page 9,
	“Connecting to Cable Reception” on page 11 or “Connecting to the
	Roof Aerial” on page 10.
	Adjust the fine tuning. See chapter “Fine Tuning” on page 20.

Remote Control Does Not Work	Make sure the unit is connected to the mains.
	Check whether the batteries are inserted correctly and whether they
	are sufficiently charged. To do this, insert new batteries for testing.
	Check whether a function key for another device has been activated.
	See chapter “Restore Default” on page 34.

Message "No Signal "	Check wether the connecting cable is properly connected to the
	computer and the respective sockets.

Message "Video not Supported"	The resolution or the frequency of the graphic board in the computer
	cannot be displayed. Change the settings in the computer.

Picture Scrolls Vertically	Check wether the connecting cable is properly connected to the
	computer and the respective sockets.

Parts of the Picture are not	Check the resolution and the frequency of the graphic board in the
Displayed	computer. Adjust the settings. See chapter “Settings” on page 16.

Picture Too Small or Too Large	Adjust the settings. See chapter “Settings” on page 16.

Horizontal or Vertical Bars	Adjust the settings of the computer. See chapter “Settings for the
	Computer” on page 34.

42

Image 44

Contents LTV46DA Page Content Reduce Noise Channel Groups Conformity DisposalUnpacking and Setup SafetyUnit Remote control Batteries Mains cable Scope of SupplyUnpacking and Setup Location Intended purposeRear View Viewing the Control PanelsFront View Remote Control Connecting to a Device with Scart Socket Connecting to two Devices with Scart SocketConnections and Start of Operation Connections for TV ReceptionConnecting to the Roof Aerial Connecting to a Device without Scart SocketConnecting to Cable Reception Connecting to HeadphonesConnecting Camcorders and Video Games Connecting Camcorders and Video Games by AV CableWith the output sockets of the external devices Connecting Camcorders and Video Games by S-Video CableConnecting Camcorders and Video Games by Scart Cable AV 3 or AV 4 on the television set Connecting to a ComputerConnecting to External Devices with Component Input Connecting the Digital Audio Output Connecting Several DevicesConnecting Mains Cable Connecting to the Hdmi ConnectionConnecting HDMI/DVI Cable Inserting the BatteriesSettings Switching OnSwitching Off Setting up for OperationTuning Starting Automatic Tuning TV StationsOpen, Select and Close Menus PressChange channel Use this function to set the channel for individual stationsPress . To return to the main menu, press Several times Set Colour SystemSet System Use this function to tune the channels manually Manual TuningFine Tuning Sound Settings Change Channel NameUnit can record and play back stereo sounds Press or Select NameImprove Signal Quality Use this function to improve poor signal qualityPress Select Install or Adjust the settings Press to save the settingsReduce Noise Channel GroupsWatch Favourite Channel Use this function to reduce picture noiseSet Wide Screen Format Set Screen LanguageSet Aspect Ratio Set Picture Mode Display if no Wide Screen Signal is ReceivedPress to open the desired menu Additional Picture SettingsSet Individual Colour Channels Audio Settings Adjust Individual Audio FrequenciesSet volume Set BalanceAdjust Medium and Low Frequencies Is a registered trademarkSet Time Enter the time using the key pad Press to save the settingsSet Sound Source Set Switch on Time Use this function to set a time when the unit turns onSet Time by Station Press Select on or OFF orSet Switch off Time Automatic Switch offAutomatic Switch off if no Signal is Received Use this function to set a time when the unit turns offSet Duration Switch Off if no Key is PressedSet On-Screen Display Activate Child Lock Child LockSet Transparency Restore Default Settings for the ComputerPress Press the mains switch on the back of the unit Set Characters for TeletextWatch Current Television Program Set VolumeWatching Recall a Favourite Channel Select SourceSelect Input Press Press repeatedly until you select the desired channelWatch Two Programs at the Same Time PIP Set Picture-in-Picture Size Set Picture-in-Picture PositionTeletext Use this function to set the size of the small pictureSet Picture Mode while Watching Adjust Picture Size while WatchingStill Picture Show TimeSet Sound Effect while Watching Set Sound while WatchingSet Stereo/Mono while Watching Use this function to set the sound effectsCleaning and Troubleshooting Cast in black and white. Adjust the colour settings See chapter Restore Default onCheck wether the connecting cable is properly connected to Cannot be displayed. Change the settings in the computerTechnical specifications Pixel TypePb/Pr 1360 xMemo Memo Memo