Energy Speaker Systems LTV46DA manual Location, Intended purpose

Page 8

Unpacking and Setup

Location

The Best Distance

The distance when watching programs on a television of this size should be approximately 2.2 to 2.7 metres. If the distance is too large or too small, this may lead to strain of your eyes. This may impair your health.

Background Light/Reflections

When watching television at night, the television should not be the only source of light in the room. The big difference of brightness between the screen and the background causes continuous dark-light adaptation of the eyes. This leads to strain of the eyes and may cause headaches. It is better, if a dim, indirect light lights-up the environment of the television.

For the same reasons, make sure that no reflections on the screen impair the picture.

The Best Alignment

Choose a location that allows you to sit in a relaxed position. Otherwise, tension and further impairments to your health may be the consequence.

Additional Information on the Location

Do not expose the unit to direct sunlight.

Avoid humid and/or dusty environments.

Place the unit on level, non-vibrating surfaces.

Do not place the unit close to the outlets of air conditioners or heaters.

Make sure the unit is easily accessible from all sides.

Make sure that no liquids can enter the unit.

Avoid extreme changes of temperature to prevent humidity condensing in the unit.

Intended purpose

This is a unit for consumer electronics. It may only be used for private, non-industrial purposes. Furthermore the unit may only be operated indoors and not for commercial purposes.

Keep this user guide carefully.

6

Image 8
Contents LTV46DA Page Content Reduce Noise Channel Groups Conformity DisposalUnpacking and Setup SafetyUnit Remote control Batteries Mains cable Scope of SupplyUnpacking and Setup Location Intended purposeRear View Viewing the Control PanelsFront View Remote Control Connecting to a Device with Scart Socket Connecting to two Devices with Scart SocketConnections and Start of Operation Connections for TV ReceptionConnecting to the Roof Aerial Connecting to a Device without Scart SocketConnecting to Cable Reception Connecting to HeadphonesConnecting Camcorders and Video Games Connecting Camcorders and Video Games by AV CableWith the output sockets of the external devices Connecting Camcorders and Video Games by S-Video CableConnecting Camcorders and Video Games by Scart Cable AV 3 or AV 4 on the television set Connecting to a ComputerConnecting to External Devices with Component Input Connecting the Digital Audio Output Connecting Several DevicesConnecting Mains Cable Connecting to the Hdmi ConnectionConnecting HDMI/DVI Cable Inserting the BatteriesSettings Switching OnSwitching Off Setting up for OperationTuning Starting Automatic Tuning TV StationsOpen, Select and Close Menus PressChange channel Use this function to set the channel for individual stationsPress . To return to the main menu, press Several times Set Colour SystemSet System Use this function to tune the channels manually Manual TuningFine Tuning Sound Settings Change Channel NameUnit can record and play back stereo sounds Press or Select NameImprove Signal Quality Use this function to improve poor signal qualityPress Select Install or Adjust the settings Press to save the settingsReduce Noise Channel GroupsWatch Favourite Channel Use this function to reduce picture noiseSet Wide Screen Format Set Screen LanguageSet Aspect Ratio Set Picture Mode Display if no Wide Screen Signal is ReceivedPress to open the desired menu Additional Picture SettingsSet Individual Colour Channels Audio Settings Adjust Individual Audio FrequenciesSet volume Set BalanceAdjust Medium and Low Frequencies Is a registered trademarkSet Time Enter the time using the key pad Press to save the settingsSet Sound Source Set Switch on Time Use this function to set a time when the unit turns onSet Time by Station Press Select on or OFF orSet Switch off Time Automatic Switch offAutomatic Switch off if no Signal is Received Use this function to set a time when the unit turns offSet Duration Switch Off if no Key is PressedSet On-Screen Display Activate Child Lock Child LockSet Transparency Restore Default Settings for the ComputerPress Press the mains switch on the back of the unit Set Characters for TeletextWatch Current Television Program Set VolumeWatching Recall a Favourite Channel Select SourceSelect Input Press Press repeatedly until you select the desired channelWatch Two Programs at the Same Time PIP Set Picture-in-Picture Size Set Picture-in-Picture PositionTeletext Use this function to set the size of the small pictureSet Picture Mode while Watching Adjust Picture Size while WatchingStill Picture Show TimeSet Sound Effect while Watching Set Sound while WatchingSet Stereo/Mono while Watching Use this function to set the sound effectsCleaning and Troubleshooting Cast in black and white. Adjust the colour settings See chapter Restore Default onCheck wether the connecting cable is properly connected to Cannot be displayed. Change the settings in the computerTechnical specifications Pixel TypePb/Pr 1360 xMemo Memo Memo