Insignia NS-30HTV manual Using your TV, Basic operation

Item	Button	Function
9	MUTE button	Toggles the sound off and on. For
		more information, see “To operate
		your TV:” on page 9.
10	DISPLAY button	In analog mode—Press to display
		the channel number on the screen.
		In digital mode—Press to display
		channel information on the screen.
		For more information, see “To
		display current information on the
		screen:” on page 9.
11	PICTURE SIZE	Press to display the PICTURE SIZE
	button	menu.
12	INPUT SELECT	Press to select either TV or external
	button	input. For more information, see
		“Selecting the video input source”
		on page 9.
13	QUICK VIEW	Press to return to the previously
	button	viewed channel. For more
		information, see “To operate your
		TV:” on page 9.
14	CLOSED	Press to display the CLOSED
	CAPTION button	CAPTION menu.
15	CHANNEL	Press to change the channels up or
	or buttons	down or to move up or down
		through menu selections. For more
		information, see “To operate your
		TV:” on page 9.
16	EXIT button	Press to exit from the on-screen
		menu.

Using your TV

Basic operation

To operate your TV:

1Press POWER on your TV or the remote control to turn on your TV.

2Set your TV/CABLE menu option to the appropriate position (for more information, see “To select TV or Cable mode:” on page 10).

3Adjust the volume level by pressing VOL + or VOL – .

The volume level is indicated on the screen by green bars. As the volume level increases, the number of bars increases. If the volume decreases, the number of green bars also decreases.

Press MUTE to switch off the sound. Press MUTE again, or VOL + or VOL – to turn on the sound.

4To change the channel up or down, press the

CH or . Your TV stops at the next channel programmed into memory. For more information, see “Memorizing channels” on page 10.

- OR -

Press the channel number buttons to select

the channel.

ANT

ABCD

12

To select analog channels:

•1-9 – Press 0 twice, then 1-9as needed. For example, to select channel 2, press 0 0 2.

•10-99 – Press 0, then the remaining 2 digits. For example, to select channel 12, press 0 1 2.

•100-125 – Press the 3 digits in order. For example, to select channel 120, press 1 2 0.

To select digital channels:

•Press the first 3 digits, then press the – button, followed by the remaining 3 digits. For example, to select channel 015-001, press 0 1 5 – 0 0 1.

Note	•	If a channel with no broadcast is selected,
		the sound is automatically muted.
	•	If a station being viewed stops
		broadcasting, your TV automatically shuts
		itself off after 15 minutes.

5Press QUICK VIEW to view the last channel selected, then press QUICK VIEW again to return to the initial channel.

Selecting the video input source

Press INPUT SELECT to view a signal from another device connected to your TV, such as a VCR or DVD player. You can select ANT, VIDEO1, VIDEO2, VIDEO3 (on the front panel), or COMPONENT depending on which input jacks you used to connect your devices.

SOURCE SELECTION

0.ANT

1.VIDEO1

2.VIDEO2

3.VIDEO3

4.COMPONENT

/0-4 : SELECT

Pressing INPUT SELECT on the remote control displays the current signal source (press INPUT SELECT again or 0-4to change).

To display current information on the screen:

1Press DISPLAY on the remote control.

www.insignia-products.com 9