KTI Networks KCD-302 manual

Page 17

2.Unscrew and loose the mounting clamp plate of the bracket. Mount the bracket with the device onto the DIN rail.

5.Screw the clamp with the bracket and make sure the device is properly fixed on the DIN rail.

-17-

Image 17

Contents Tri-segment Media Converter IndustrialInternational United StatesEthernet is a registered trademark of Xerox Corp Table of Contents Introduction Page Features Specifications Fiber Optic Interfaces FX1 Port, FX2 Port Twisted-Pair Interface TP Port, or called copper PortLEDIndicators Configuration Setting Switches SWBasic Information DC Power InputMechanical EnvironmentalCE/EMC CertificateOptical Specifications Model SpecificationsModel Specifications Special Functions Far End Fault FunctionAuto MDI/MDI-X Function Auto-negotiation FunctionUnpacking InstallationDIN-Rail Mounting Page Page Mounting on a Plane Surface Page DC Power Terminal Block Applying PowerDC Power Input Specification DC Power Jack Network Cables Configuration SetupMaking TP Port Connection Making FX Port Connections Multimode MMF 50/125, 62.5/125 mm SinglemodeSMF-9/125mm Configuration Switches & LED Indicators 2 802.3x Function Setting SW4 Configuration SwitchesTP Port Settings SW1-SW3 Link Partner of FX Port Distance MMF cable FX Port Duplex Settings SW5 SW6Factory Default Settings LED Display Status & Interpretation LED Indicators