KTI Networks KCD-302 manual Applying Power, DC Power Input Specification, DC Power Terminal Block

Page 21

2.4 Applying Power

The product provide two types of power interfaces, terminal block and DC power jack for receiving DC power input from external power supply.

DC Power Input Specification

 

Operating Voltage

+7~+30VDC

Power Consumption

Max. 3.0W @30VDC

DC Power Terminal Block

 

Connectors

Screw-type Terminal block (2 sets)

Pin Assignments

DC1+ -

Positive (+) Negative (-) terminals

 

DC2+ -

2nd Positive (+) Negative (-) terminals

Power wires

24 ~ 12AWG (IEC 0.5~2.5mm2)

The steps to install power wires to the terminal block are:

1.Loose the terminal screw to open the contact for power wire insertion. Insert power wire into the contact.

2. Screw the terminal and make sure power wire is fixed securely.

-21-

Image 21
Contents Tri-segment Media Converter IndustrialInternational United StatesEthernet is a registered trademark of Xerox Corp Table of Contents Introduction Page Features Specifications Fiber Optic Interfaces FX1 Port, FX2 Port Twisted-Pair Interface TP Port, or called copper PortLEDIndicators Configuration Setting Switches SWBasic Information DC Power InputMechanical EnvironmentalCE/EMC CertificateModel Specifications Model SpecificationsOptical Specifications Special Functions Far End Fault FunctionAuto MDI/MDI-X Function Auto-negotiation FunctionUnpacking InstallationDIN-Rail Mounting Page Page Mounting on a Plane Surface Page Applying Power DC Power Input SpecificationDC Power Terminal Block DC Power Jack Configuration Setup Making TP Port ConnectionNetwork Cables Making FX Port Connections Multimode MMF 50/125, 62.5/125 mm SinglemodeSMF-9/125mm Configuration Switches & LED Indicators Configuration Switches TP Port Settings SW1-SW32 802.3x Function Setting SW4 FX Port Duplex Settings SW5 SW6 Factory Default SettingsLink Partner of FX Port Distance MMF cable LED Display Status & Interpretation LED Indicators