KTI Networks KCD-302 manual Mounting on a Plane Surface

Page 19

2.3 Mounting on a Plane Surface

An optional mounting bracket, as shown below is also available for mount- ing the device on a plane surface such as a wall, a wood board, or a metal plate in an industrial enclosure.

To mount the device on a plane surface, the steps are:

1.Clamp the bracket into the device and align the bracket with the bottom surface of the device and screw it on the converter firmly as shown below:

-19-

Image 19
Contents Tri-segment Media Converter IndustrialInternational United StatesEthernet is a registered trademark of Xerox Corp Table of Contents Introduction Page Features Specifications Fiber Optic Interfaces FX1 Port, FX2 Port Twisted-Pair Interface TP Port, or called copper PortLEDIndicators Configuration Setting Switches SWEnvironmental DC Power InputBasic Information MechanicalCE/EMC CertificateModel Specifications Model SpecificationsOptical Specifications Auto-negotiation Function Far End Fault FunctionSpecial Functions Auto MDI/MDI-X FunctionUnpacking InstallationDIN-Rail Mounting Page Page Mounting on a Plane Surface Page DC Power Input Specification Applying PowerDC Power Terminal Block DC Power Jack Making TP Port Connection Configuration SetupNetwork Cables Making FX Port Connections Multimode MMF 50/125, 62.5/125 mm SinglemodeSMF-9/125mm Configuration Switches & LED Indicators TP Port Settings SW1-SW3 Configuration Switches2 802.3x Function Setting SW4 Factory Default Settings FX Port Duplex Settings SW5 SW6Link Partner of FX Port Distance MMF cable LED Display Status & Interpretation LED Indicators