Environmental Conditions, Unpacking | IDEAL INDUSTRIES 45-935

Caution and Safety Instructions

Please read, understand and follow the warnings and instructions in this manual. Failure to do so can result in serious personal injury.

•Do not alter, modify or misuse the machine.

•Do not operate the machine using an ungrounded electrical system.

•Do not perform any maintenance on the machine unless both the electrical power and air supply are disconnected.

•Do not operate the machine in a damp, wet, gaseous, hazardous or poorly ventilated work environment.

•Do not obstruct any ventilation or air flow around the machine.

CAUTION – Hazardous parts inside, refer servicing to qualified service personnel.

CAUTION – Blade area can create high temperatures; refer servicing to qualified service personnel.

CAUTION – Use proper heavy lifting procedures.

Environmental Conditions

Indoor use only

Altitude up to 2,000m

Temperature 5°C to 40°C

Maximum relative humidity 80% for temperatures up to 31° decreasing linearly to 50% humidity at 40°C

Mains voltage fluctuations not to exceed±10% of normal voltage

Insulation Category II

Pollution degree 2

Unit can produce sound levels greater than 85 dB, proper hearing protection is required.

Warranty & Service Policy

Each unit is warranted to be free from defects in materials and workmanship under normal use and service for a period of 12 months after the date of purchase. The obligations of IDEAL under this warranty shall be limited to repairing at the Sycamore, Illinois manufacturing facility any unit which shall, within the 12 month period, be returned to us with the transportation charges prepaid, and with our examination shall disclosed to our satisfac- tion to have been defective. This warranty shall not aply to any model which has been altered or repaired outside the factory in any way so as to affect its operation nor which has been subject to misuse, negligence, accident or installed or operated in any other way than in accordance with our instruc- tions, nor shall this warranty extend to repairs or replacement made necessary by the use of accessories not recommended by IDEAL.

Unpacking

The IDEAL Shielded Twisted Pair (STP) Cable Stripping System is shipped in protective foam packaging. You may wish to save this packaging for future transportation.

The STP unit is equipped with a power cord, air hose, slug tray, IDEAL T®-Cutter Lite wire cutter, keys, key chain, air regulator kit and an operation manual.

Lifting Instructions for the STP

Locate the front and rear of the machine. The front of the machine has the keypad and display. Position the machine so the front of the machine is pointing to your left and the rear of the machine is to your right. Also position the machine as close to your body as possible. Place your left hand underneath the bottom plate and center it between the two front rubber feet. Place your right hand underneath the bottom plate and center it between the two rear rubber feet. Pull the machine up and

Description	Cat. No.

STP, 115 VAC, 60 Hz 4A	45-930
STP, 230 VAC, 50 Hz 2A	45-935
Power Cord	K-6773
T®-Cutter Lite	45-260
Air Hose	K-6865
Slug Tray	IA-3124
Air Regulator	45-906
Operation Manual	ND-3514
Security keys	1301.012
IDEAL Key Chain	99-020

toward your body. When carrying the STP, always keep the machine as close to your body as possible.

Note: Where ever possible, lift with your legs slightly bent and your back straight (vertical). Lift the load by straightening your legs not by pulling up with your arms.

STP Service Setup (Qualified Service Personnel)

The STP front cover is secured with two (2) screws for shipping. Remove the screws from lower right and left sides of cover before opening lid.

Gripper pad pins are secured with plates for shipping. Remove these plates from both front and rear gripper pad housings before machine use.

NOTE: Do not invert the unit after shipping plates have been removed. Gripper retaining pins will fall out when inverted.

Close cover and replace screws removed.

Install slug tray - Insert the long screws provided, tighten.

Rear

Front

45-930, 45-935 specifications

IDEAL Industries is recognized for its commitment to providing high-quality tools and connectors, particularly in the electrical and telecommunications sectors. Among its extensive range of offerings, the IDEAL INDUSTRIES 45-935 and 45-930 stand out as exceptional products tailored to enhance precision and efficiency in various applications.

The IDEAL INDUSTRIES 45-935, commonly known as the Wire Connector Kit, is meticulously engineered to facilitate seamless electrical connectivity. One of its most notable features is its compact design, which allows for easy handling and storage. The kit includes a variety of wire connectors that cater to different gauge sizes, making it an ideal solution for both professional electricians and DIY enthusiasts. This versatile set not only enhances connectivity but also ensures that connections remain secure and reliable over time.

On the other hand, the IDEAL INDUSTRIES 45-930, recognized as the Pro Series Wire Connector, boasts advanced technologies designed for superior performance. Notably, it incorporates an innovative rubber seal that provides moisture resistance, ensuring durable connections in outdoor and damp environments. The connectors are constructed with a high-grade, flame-retardant material, further enhancing their reliability and safety features.

Both products emphasize ease of use. They are designed with color-coded wire connections and ergonomic shapes, allowing for quick identification and hassle-free installation. The intuitive design minimizes the risk of errors during the connection process, significantly reducing installation time and enhancing overall productivity.

Another significant characteristic of the IDEAL INDUSTRIES 45-935 and 45-930 is their compliance with industry standards. They undergo rigorous testing to ensure that they meet or exceed necessary safety guidelines, providing users with peace of mind when utilizing these connectors in their projects.

Furthermore, IDEAL Industries has a strong legacy of innovation. The company continually seeks to improve its products through research and customer feedback, resulting in tools that not only meet current market demands but also anticipate future needs.

In summary, the IDEAL INDUSTRIES 45-935 and 45-930 are exemplary tools that combine superior engineering, user-friendly design, and advanced technologies, making them indispensable assets for anyone in the electrical field. Whether for professional installations or home projects, these products promise reliability, safety, and efficiency in every connection.