Tips and Trouble Shooting

STP Service continued

Preventative Maintenance

The STP requires very little maintenance aside from changing blades and gripper pads.

Visually inspect threaded rods and guide rods. If they look dry, lubricate with a light machine oil.

Remove slug debris from unit.

Replace nylon cable chains (2) as required.

OIL RODS WHEN DRY

Cleaning Your STP

Note: Disconnect power and air when cleaning the unit. Clean front gripper pads and holder with rubber roller cleaner. Clean rear gripper pads and holder with rubber roller cleaner.

Remove debrise from both front and the backside of the entry gate with a clean cloth. Empty the lsug tray in a timely manner.

Clean the outside case of the STP with mild detergent.

Changing Slug Tray Location

The STP slug tray may be repositioned:

1.Disconnect power.

2.Disconnect air.

3.Do not invert machine or gripper pins might fall out.

4.Remove screw, move to opposite side.

5.Secure slug tray by replacing screw.

Always disconnect power and air when servicing the unit. Please read the Operation Manual thoroughly before attempting to

operate the STP.

SYMPTOMRECOMMENDATIONS

•Unit does not turn on. ✔ Check electrical connections.

✔Check electrical supply.

✔Check fuses.

• Unit does not cycle.	✔ Make sure unit is in ready mode.
	✔ Check air supply and connections.
	✔ Make sure cable is making contact with trigger.

• Unit does not strip wire. ✔ Straighten wire to hit trigger.

✔Check for proper control settings.

✔Consult IDEAL for wire applications.

✔Check blade for proper heating.

•Slug does not pull off. ✔ Check for proper PRESSURE setting.

✔Check air supply. Set at 100 PSI.

✔Check rear grip for slug debris.

✔Check rear grip pads. Replace if worn.

✔Check for proper strip length.

✔Axial cut of insulation may be required. Consult IDEAL for wire application support.

SYMPTOMRECOMMENDATIONS

•Wire not cut completely. ✔ Check for proper HEAT setting.

✔Check for proper SPEED setting.

✔Check for proper blade movement.

✔Check condition of blades. Replace if necessary.

✔Check for proper. blade connections.

✔Consult IDEAL for wire applications.

• Wire slips further into	✔ Check for proper PRESSURE setting.
machine when gripper	✔ Check front grip pads. Replace if worn.
attempts to pull off	✔ Axial cut of insulation may be required.
slug.	Consult IDEAL for wire application support.

• Unit cycles repeatedly. ✔ Make sure slugs are not in contact with trigger block.

✔Check for obstruction at trigger.

✔Check and empty slug tray.

✔Make sure slug is not in contact with trigger.

•Wire will not fit into unit. ✔ Straighten excessive curl in wire.

✔Make sure unit is in ready mode.

✔Check for obstruction in wire path.

✔Check all grip pads for proper fit.

All of the cylinders, solenoids and sensors may be tested individually. Please refer to the TEST section on page 10. Operate each individual component to determine the status. Repair and or replace components as required.

45-930, 45-935 specifications

IDEAL Industries is recognized for its commitment to providing high-quality tools and connectors, particularly in the electrical and telecommunications sectors. Among its extensive range of offerings, the IDEAL INDUSTRIES 45-935 and 45-930 stand out as exceptional products tailored to enhance precision and efficiency in various applications.

The IDEAL INDUSTRIES 45-935, commonly known as the Wire Connector Kit, is meticulously engineered to facilitate seamless electrical connectivity. One of its most notable features is its compact design, which allows for easy handling and storage. The kit includes a variety of wire connectors that cater to different gauge sizes, making it an ideal solution for both professional electricians and DIY enthusiasts. This versatile set not only enhances connectivity but also ensures that connections remain secure and reliable over time.

On the other hand, the IDEAL INDUSTRIES 45-930, recognized as the Pro Series Wire Connector, boasts advanced technologies designed for superior performance. Notably, it incorporates an innovative rubber seal that provides moisture resistance, ensuring durable connections in outdoor and damp environments. The connectors are constructed with a high-grade, flame-retardant material, further enhancing their reliability and safety features.

Both products emphasize ease of use. They are designed with color-coded wire connections and ergonomic shapes, allowing for quick identification and hassle-free installation. The intuitive design minimizes the risk of errors during the connection process, significantly reducing installation time and enhancing overall productivity.

Another significant characteristic of the IDEAL INDUSTRIES 45-935 and 45-930 is their compliance with industry standards. They undergo rigorous testing to ensure that they meet or exceed necessary safety guidelines, providing users with peace of mind when utilizing these connectors in their projects.

Furthermore, IDEAL Industries has a strong legacy of innovation. The company continually seeks to improve its products through research and customer feedback, resulting in tools that not only meet current market demands but also anticipate future needs.

In summary, the IDEAL INDUSTRIES 45-935 and 45-930 are exemplary tools that combine superior engineering, user-friendly design, and advanced technologies, making them indispensable assets for anyone in the electrical field. Whether for professional installations or home projects, these products promise reliability, safety, and efficiency in every connection.