S E T T I N G S
Settings > Basis
UHF-output channel
See page 7.
SCART-mode:
In this line set by means of the
Subtitling:
In this line set by means of the
Installation
When you have set your receiver according to your individual requirements, you must if required now set the receiver in accordance with your aeri- al. In the factory your receiver was prepro- grammed to ASTRA and EUTELSAT with universal LNB (see chapter Technical Terms). After putting the receiver into operation, these programs will be received on a corresponding receiver system without further settings.
If you also want to receive from other satellites, or want to use another LNB, you set your receiver to the data required as follows:
Press menu to enter the main menu.
Mark with the
Now the menu settings appear.
Mark the line
Now the menu LNB appears.
14