Triax DVB 65S Test-Transponder, Transponder frequency, Polarisation, Symbol rate, FEC-rate

S E T T I N G S

Test-Transponder

The following sub-entries of this menu only have to be entered if you want to test a satellite signal from a satellite (User 1 to 17) which has been en- tered by yourself.

Transponder frequency:

Enter in this line by means of the numeric keys a frequency at which digital programs are being transmitted.

Polarisation:

Enter in this line by means of the OK-buttonthe polarisation level (horizontal or vertical), at which the program wanted is transmitted.

Symbol rate:

The symbol rate describes the number of data transmitted per second, e.g. 27000 (27000 sym- bols per second). Enter the corresponding symbol rate by means of the numeric keys.

FEC-rate:

With FEC the error bit correction is set in accord- ance with the value of the selected transponder. Enter the corresponding FEC by means of the OK-button. It may be 1/2, 2/3, 3/4, 5/6, 7/8 or AUTO.

Signal:

This line displays the signal strength if you have stated the correct indications of the test trans- ponder.

red bar:

Poor reception, no digital reception possible. yellow bar:

good reception

green bar:

very fine reception

17