S E T T I N G S
> Settings > LNB
The following settings can be made in this sub-menu:
DiSEqC on/off
DiSEqC (see Chapter Technical Terms) is used for the control of major aerial systems. On this line the DiSEqC is switched on/off by means of the OK-button.
Setting of matrix switch and LNB-features The menu lists the 4 switch criteria of DiSE- qC-control. Your receiver has been pre-pro- grammed to receive ASTRA in switch setting A/A and EutelSat in a multiswitch setting B/ A. If the matrix switch of your receiver sys- tem is built differently, or receives from other satellites, you can adapt the receiver to suit your needs as follows:
Select the satellite or DiSEqC-setting you want to change (e.g. DiSEqC AB/no satel- lite) by marking this line by means of the cursor-button up/down.
Press the OK-button.
A list of different satellites now appears. Mark by means of the cursor-buttonthe satellite you want to select. By means of the cursor-button up/down the cursor is moved one line up or down, with the cursor- button left/right you go to the next or previ- ous page. If the satellite wanted is not listed, you select a free place, marked UserX (e.g. User1).
Confirm with OK.
The field marked is now being inserted in the place previously marked in the menu >Settings>LNB.