TROUBLE SHOOTING
When all the data are entered, you just confirm by activating the ”accept function” (yellow).
Now your receiver automatically starts on the de- sired time and tunes to the desired program.
Trouble Shooting
What is the problem | What might the reason be | Corrective action |
|
|
|
No picture, no sound, no display | No mains voltage | Check mains cable and sockets |
|
|
|
No picture, no sound, display on | Switch off the receiver, repair the | |
|
| |
|
| ver |
| Defective or no cable connection | Check all cable connections |
| Defective LNB | Replace the LNB |
| Wrong ODU set up | Set correct ODU up |
| ODU set up incorrectly | Set up the ODU again |
|
|
|
In the picture small square | Heavy rain or snow | Remove snow from ODU |
boxes (small bricks) arise |
|
|
periodically. | ODU incorrectly set up | Set up ODU correctly |
Periodically the receiver switch- | The dish is too small in the | Use a larger dish |
es to still image - no sound. | place of reception |
|
Periodically the screen turns | There is an obstacle between dish | Install the dish in a place |
black, "No signal" is displayed | and satellite (e.g. a tree) | with a clear view. |
|
|
|
Sound OK, no picture | Set to a radio program | Switch to TV |
|
|
|
Picture and sound disturbed in | ODU placed incorrectly | Check ODU |
programs which were OK before | or defective |
|
| Program transferrred to another | Make a search |
| transponder | (see "Installation") |
| Program no longer being |
|
| transferred | None |
|
|
|
Remote control does not work | Set to wrong mode | Set mode to SAT1 |
|
|
|
34