Shaw M1055FR manual Searching for Your Code, Aim the remote control at your TV/VCR

4.Aim the remote control at your TV/VCR

Combo and press PWR once. The device should turn off. If it does not respond, repeat steps 2 through 3, trying each code listed for your brand until you find one that works. If it still does not respond, try searching for the code (“Searching for Your Code” starting on page 11).

5.For future reference, write down each working device code in the boxes below:

TV/VCR Code

TV Code (if used)

SEARCHING FOR YOUR CODE

If your home entertainment device does not respond to theAtlas Shaw DVR/PVR 5-Device Universal Remote Control after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code.

For example, to search for a code for your TV:

1.Turn on your TV.

2.On the remote control, press TV once; it will

blink once. Then press and hold SETUP until the TV key blinks twice.

3.Enter 9 9 1. The TV key will blink twice.

4.Aim the remote control at the TV and press

PWR once.

5.Press CH+ one or more times and stop when

the TV turns off.

NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first.

6.Press SETUP once to lock in the code. The TV

key will blink twice.

11