JVC CA-UXB70 Adjusting the Volume, Reinforcing the Bass Sound, On the remote control, On the unit

Adjusting the Volume

You can adjust the volume level only while the unit is turned on. The volume level can be adjusted between “VOLUME MIN” and “VOLUME 1” – “VOLUME 40 (VOLUME MAX).”

•The volume level has no effect on recording.

On the remote control:

To increase the volume, press VOLUME +.

To decrease the volume, press VOLUME –.

•When you press and hold either button, you can change the volume level continuously.

VOLUME

On the unit:
To increase the volume, turn the	VOLUME

Reinforcing the Bass Sound

The richness and fullness of the bass sound is clearly maintained regardless of how low you set the volume

—Active Hyper Bass Pro.

•This function also affects the sound from headphones.

•This function only affects the playback sound, and does not affect your recording.

To get the effect, press AHB PRO repeatedly so AHB PRO that “AHB BASS1” or “AHB BASS2” appears on

the display.

The AHB PRO indicator also lights up on the display.

AHB PRO indicator

VOLUME + / – control clockwise.

To decrease the volume, turn the

VOLUME + / – control counterclockwise.

1 2 3 4 5

CD

AHB PRO

For private listening

Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume before connecting or putting on the headphones.

DO NOT turn off (standby) the unit with the volume set to an extremely high level; Otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the unit or start playing any source.

REMEMBER you cannot adjust the volume level while the unit is in standby mode.

•Each time you press the button, the Active Hyper Bass Pro mode changes as follows:

AHB BASS1 AHB BASS2

BASS OFF (canceled)

•“AHB BASS2” is more effective than “AHB BASS1.”

To cancel the effect, press AHB PRO repeatedly until “BASS OFF” appears on the display.

The AHB PRO indicator goes off.

11