All Discs Synchronized Recording
1 Insert a recordable cassette into the cassette compartment with the exposed part of the tape facing left.
2 Load discs into the 5-CD Changer.
•If the current playing source is not the CD player, press 3/8 CD, then 7 before going to the next step.
•You can make a program (see page 19) or select the Random Play mode (see page 20) if you want. In this case, you cannot select the starting disc
= go to step 5.
3 Select the disc number you want to start recording from.
On the remote control: |
| DISC UP |
Press DISC UP or DISC |
|
|
DOWN. | DISC DOWN | |
On the unit: |
|
|
Press DISC SELECT repeatedly. |
| DISC |
|
| SELECT |
|
| CD |
4 Press CD REC MODE on the remote | CD REC | |
MODE | ||
control to select “ALL CD.”
Each time you press the button, the recording mode changes as follows:
1 CD 
ALL CD 
1ST TRACK
1 2 3 4 5
CD
5 Press REC. | REC | |||
| ||||
The | REC | indicator lights up on the display and | ||
recording starts. |
| |||
1 | 2 | 3 | 4 | 5 |
CD |
|
|
| REC |
To stop while recording, press 7.
The tape stops after 4 seconds.
To remove the cassette, press 0 on the unit.
When recording discs
A
1Load discs you want to record into the
2Select the disc number you have loaded. On the remote control:
Press 
DISC UP or 
DISC DOWN when the current playing source is the CD player.
On the unit:
Press DISC SELECT repeatedly.
3Press 3/8 CD twice so that disc playback is paused.
•If the pausing position is not “0:00,” you can skip back to “0:00” by pressing 4 (or 4 DOWN on the unit).
4Press REC to start recording.
When all loaded discs are recorded, recording will stop.
You cannot exchange a disc while recording another disc.
Pressing CD REC MODE changes the disc playback mode to Continuous Play and cancels the Repeat Play mode.
Current track number | Elapsed playing time |
When all loaded discs are recorded, recording will stop. Both the
25
