Using the Timers
Three timers are
•Before using these timers, make sure the
Using the Daily Timer and the Recording Timer
You can set the timer when the unit is either turned on or in standby mode.
How the timer actually works
When the 
(timer) indicator flashes just before the
continues flashing while the timer is operating). Then, when the
• When the DAILY indicator is lit on the display, the timer |
On the remote control ONLY:
1 Press CLOCK/TIMER. | CLOCK/ |
TIMER |
The 
(timer) indicator lights up and the timer mode indicator (DAILY or REC) flashes on the display.
The unit enters the
DAILY 
Ex.: When the Daily Timer has been selected the last time.
2 Set the | DISC UP |
to turn on. |
|
acts as the Daily Timer. Once the timer has been set, it will |
be activated at the same time everyday until the timer is |
turned off. |
• When the REC indicator is lit on the display, the timer acts |
as the Recording Timer. After the |
the details of the setting remain stored but the timer is |
turned off. |
1)Press 
DISC UP or 
DISC DOWN to set the hour, then press
CLOCK/TIMER.
2)Press 
DISC UP or 
DISC DOWN to set the minute, then press
CLOCK/TIMER.
The unit enters the
DISC DOWN
CLOCK/
TIMER
Before you start...
When using “TUNER” as the source to play, make sure to select the desired station before turning off the power.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start again from step 1.
DAILY 
3 Set the off-time you want the unit to turn off.
1)Press 
DISC UP or 
DISC DOWN to set the hour, then press
CLOCK/TIMER.
2)Press 
DISC UP or 
DISC DOWN to set the minute, then press
CLOCK/TIMER.
The unit enters the source setting mode.
DISC UP
DISC DOWN
CLOCK/
TIMER
DAILY
27
