Manuals / JVC / Home Audio / Stereo System

JVC SP-UXB70, CA-UXB70 Connecting Other Equipment, Putting the Batteries into the Remote Control

Models: SP-UXB70 CA-UXB70

1 36

Download 36 pages 22.3 Kb

Page 11

To remove the speaker grilles

To remove the speaker grilles

The speaker grilles are removable as illustrated below:

HolesProjections

Speaker grille

To remove the speaker grille, insert your fingers at the top of the speaker grille, then pull towards you. Also pull the bottom towards you.

To attach the speaker grille, follow the illustration above.

Connecting Other Equipment

You can connect audio equipment—used only as a playback device.

•DO NOT connect any equipment while the power

is on.

•DO NOT plug in any equipment until all connections are complete.

To connect audio equipment

Be sure that the plugs of the audio cords are color coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.

AUX/DVD

RIGHT LEFT

Audio equipment

To audio output

To play the other equipment through this unit, connect

between the audio output jacks on the other equipment and AUX/DVD jacks by using audio cords (not supplied).

NOW you are ready to plug in the unit and any other connected equipment.

IMPORTANT:

Be sure to check that all connections have been made before plugging in the power cord.

Putting the Batteries into the Remote Control

Insert the batteries—R6(SUM-3)/AA(15F)—into the remote control by matching the polarity (+ and –) on the batteries with the + and – marking on the battery compartment. When the remote control can no longer operate the unit, replace both batteries at the same time.

1

2	R6(SUM-3)/AA(15F)

3

•DO NOT use an old battery together with a new

one.

•DO NOT use different types of batteries together.

•DO NOT expose batteries to heat or flame.

•DO NOT leave the batteries in the battery compartment when you are not going to use the remote control for an extended period of time. Otherwise, the remote control will be damaged from battery leakage.

8

Image 11

JVC SP-UXB70 Connecting Other Equipment, Putting the Batteries into the Remote Control, To remove the speaker grilles

Contents

UX-B70-Consistsof CA-UXB70and SP-UXB70 GVT0103-003BBINSTRUCTIONS MICRO COMPONENT SYSTEMCAUTION Proper Ventilation Warnings, Cautions and OthersIMPORTANT FOR LASER PRODUCTS REPRODUCTION OF LABELSSAFETY INSTRUCTIONS Introduction PrecautionsInstallation Power sourcesPlaying Back Discs on the 5-CDChanger ContentsListening to FM and AM MW Broadcasts Front Panel Location of the Buttons and ControlsCD ALL A - B TAPE Display window on the front panelDisplay window Remote Control 1Attach the FM antenna to the FM 75 Ω Connecting AntennasGetting Started Unpackingterminal Connecting Speakers2Hold the clamp of the speaker terminal 3Insert the end of the speaker cord into theTo connect audio equipment Connecting Other EquipmentPutting the Batteries into the Remote Control To remove the speaker grillesCLOCK/TIMER Setting the ClockOn the remote control ONLY 1 Press CLOCK/TIMER On the remote control ONLYTo activate the Auto Standby function Turning On the PowerTo turn off the unit automatically Auto Standby To turn on the unit, press STANDBY/ONTo increase the volume, press VOLUME + Adjusting the VolumeOn the remote control AHB BASS1 AHB BASS2 BASS OFF canceledPress BASS to adjust the bass Adjusting the TonePress BASS to adjust the bass level or press TREBLE to adjust the trebleDOWN to select a preset number Tuning in to a StationPresetting Stations 1 Tune in to the station you want to presetOn the remote control ONLY Tuning in to a Preset Station4 Press SET again Press DISC UP or DISCChanging the RDS Information PS Program ServiceTo search for a program using the PTY codes Receiving FM Stations with RDSNEWS 1 Press TA/News/Info until the datatype you want flashes on the display To activate the Enhanced Other Networks functionOn the unit ONLY Playing Back Discs on the 5-CDChangerLoading Discs 1 Load discs into the 5-CDChanger 2 Select a disc to play On the remote controlPlaying Back All the Entire Discs -ContinuousPlay Basic Disc OperationsOn the remote control Programing the Track Playing Order -ProgramPlay2 Press PLAY MODE repeatedly until “CD PROGRAM” appears on the6 Press 3/8 CD To check the program contentsPlaying at Random-RandomPlay 5 Program other tracks you wantwhich you want to repeat point A Repeating Tracks or Discs-RepeatPlayProhibiting Disc Ejection 2 Press SET at the starting point fromPlaying Back a Tape When the tape direction isWhen the tape direction is Playing Back Tapes2 Check the recording direction for the tape indicator lights up like-orRecording Recording on a TapePress DISC SELECT repeatedly remote control to select “1 CD.”Recording Discs -DiscSynchronized Recording Press DISC UP or DISC DOWN On the unitcontrol to select “ALL CD.” 2 Load discs into the 5-CDChangerDOWN 4 Press CD REC MODE on the remoteyou want to record control to select “1ST TRACK.”Press REC while “1ST TRACK” still Press REC while playing the trackHow the timer actually works Using the TimersUsing the Daily Timer and the Recording Timer 1 Press CLOCK/TIMERTo deactivate the timer temporarily, press DOWN to set the volume levelthen press CLOCK/TIMER 7 Adjust the clock if neededOn the remote control ONLY Using the Sleep TimerHow the Sleep Timer actually works Press SLEEPGeneral Notes MaintenanceCleaning the unit To clean the discAction TroubleshootingSymptom Possible CauseDescription of the PTY codes SpecificationsSupplied accessories Additional InformationVICTOR COMPANY OF JAPAN, LIMITED UX-B70MICRO COMPONENT SYSTEM0503MWMMDWJEM 2003 VICTOR COMPANY OF JAPAN, LIMITED