1.2 Appearance and Part Names
1.2Appearance and Part Names
This section gives the names of all parts of the emulator unit.
■Appearance and Part Names
Figure 1.2-1 "Top view of the emulator unit" to Figure 1.2-3 "Rear view of the emulator unit" show the exterior of the emulator unit and give the names of all of its parts.
Figure 1.2-1 Top view of the emulator unit
(1)
POWERUVCC
(2)
(3)
(4)
(5)
No. | Name | Description | ||
|
|
| ||
(1) | Status indicator LCD | Displays different kinds of information, including setting values, communication status, | ||
and operating status.(*1) |
|
| ||
|
|
|
| |
(2) | POWER LED | Goes on when emulator power is supplied. | ||
|
|
|
|
|
(3) | UVCC LED | Goes on when user system power (UV |
| ) is supplied.(*2) |
|
|
| CC | |
(4) | Setting switches | Used to change settings and the information displayed on the status indicator LCD.(*1) | ||
(5) | Adapter board connector | Connects to an adapter board (option). |
| |
|
|
|
|
|
*1: For information on the type of information displayed on the status indicator LCD and how to use the setting switches, see Section 3.7 "Using the Setting Switches."
*2: If the evaluation MCU has a dual source power supply, this LED goes on when both power supplies are turned on.
3