CHAPTER 3 OPERATING THE EMULATOR
3.1Mounting an Evaluation MCU
Mount an evaluation MCU on the emulator.
■Mounting an evaluation MCU
CAUTION
Make sure that power to the product is turned off and the power plug is
Prohibition disconnected from outlets before mounting the evaluation MCU. Doing so may result in device problems or electric shock.
Pull the lever of an IC socket for an evaluation MCU on the emulator, and mount the evaluation
MCU while aligning the pin No. 1 index mark ( of the IC socket.
or ) of the evaluation MCU with that ( )
After mounting the evaluation MCU, push the lever of the IC socket back to its original position.
Figure 3.1-1 Mounting an evaluation MCU
Evaluation MCU
Pin No. 1 index mark
Evaluation MCU
IC socket for the evaluation MCU | IC socket for the evaluation MCU |
(Top view) | (Side view) |
34