Fujitsu MB2147-01 manual RS-232C Port Specifications, Emulator includes an RS-232C port

Page 20

CHAPTER 1 PRODUCT HANDLING AND SPECIFICATIONS

1.4RS-232C Port Specifications

The emulator includes an RS-232C port.

■RS-232C port specifications

Table 1.4-1"RS-232C port specifications" lists the RS-232C port specifications, and Figure 1.4- 1 "Pin assignment of the RS-232C connector" shows the pin assignment of the RS-232C connector.

For information on Interlink cable connection, see Section 1.10 "Options".

Table 1.4-1 RS-232C port specifications

Item	Description

Connector shape	D-sub 9 pins (male)

Signal definition	DTE (same as the signal definition for personal computers)

Baud rate(*1)	9600, 19.2 K, 115.2 K [bps]
Data bit length	8 bits

Start bit length	1 bit

Stop bit length	1 bit

Parity bit	None

X control	None

*1: Baud rates depend on the emulator debugger specifications. For details, see the Softune Workbench Operation Manual.

Figure 1.4-1 Pin assignment of the RS-232C connector

CTS

RTS

To internal emulator circuit

GND

TXD

RXD

RS-232C connector

8 (CTS)

7 (RTS)

6 (DSR)

5 (GND)

4 (DTR)

3 (TXD)

2 (RXD) 1 (DCD)

Note: The emulator uses pin assignments that do not use some signal lines, as shown above.

6

Image 20

Contents MB2147-01 Page Fujitsu Limited Page Using the product safely Guarantee and liabilityObjectives and intended readers TrademarkSafety precautions No disassemblyDescription Electric shock PlugDescription Prohibition Description Plug 25, 26 Description Organization of this Manual Related manualsViii Contents Page Product Handling and Specifications Checking Packed Components Checking packed componentsAppearance and Part Names Appearance and Part Names2 Front view of the emulator unit 1 General specifications General SpecificationsGeneral Specifications RS-232C Port Specifications RS-232C port specifications1 RS-232C port specifications Description Emulator includes an RS-232C portUSB Port Specifications USB Port Specifications1 USB port specifications Description Emulator includes a USB portLAN Port Specifications LAN port specifications1 LAN port specifications Description Emulator includes a LAN portExternal Trigger Input Terminal Specifications External Trigger Input Terminal SpecificationsPrecautions on use Break slipProgram Execution Output Terminal Specifications Program execution output terminal specificationsOperational flow Power-On Debug SpecificationsPower-On Debug Specifications Operation outline Operation timing Detection of power-offDetection of power-on 10-1 Options Name Model name OptionsOptions RXD Precautions about possible problems Plug Precautions about Possible ProblemsPrecautions about Possible Problems Precautions on Handling the Product Precautions on handling the product Electric shockPrecautions on Handling the Product Prohibition Product Handling and Specifications Precautions on Use Precautions on use ProhibitionPrecautions on storage Prohibition problemsConnecting the Emulator System Configuration System configurationConnecting an Adapter Board Connecting an Adapter BoardConnecting the User System Connecting the user system1 Probe configurations Cable used Connection to user system Connect a probe to the user system1 Connecting using a probe cable to the user system Probe CN1 B1 Probe CN B2 3 Connecting using flat cables to the user system Connecting a Probe Connecting a probe NoteConnecting a probe using a probe cable Connect a probe to the adapter boardConnecting a Probe Connecting a probe using flat cables 2 Connecting a probe using flat cablesConnecting a Host Machine Connecting a host machineConnecting Test Equipment Connecting Test EquipmentConnecting the AC Adapter Connecting the AC adapterOperating the Emulator Mounting an evaluation MCU Mounting an Evaluation MCUMount an evaluation MCU on the emulator Clock Supply Clock SupplyThis section explains clock supply to the evaluation MCU 2 Configuration of peripheral circuits for the clock circuit Settings for subclock selection FC SELEmulator-dedicated Power Supply Switching Switching of the emulator-dedicated power supplyPage Switching of the user port power supply User Port Power Supply SwitchingSelect a user port power supply for the evaluation MCU Switching the C Pin Setting Switching the C Pin SettingSwitching the C-pin setting 1 Settings of the C-pin selection switch Pin FC SEL settingSwitching of the user data bus User Data Bus SwitchingSet the setting of the user data bus selection switch User Data Bus Switching Using the Setting Switches Functions of the setting switchesUsing switches for selection or confirmation Display configuration 1 Menu configurationPower-on sequence Prohibition Power-On SequencePower-On Sequence 1 Power-on sequence Power-off sequence Prohibition Power-Off SequencePower-Off Sequence Operating the Emulator Fujitsu Semiconductor Controller Manual