Woods Equipment MAN0063 #57923 Hose Kit Cont’d, Route Hydraulic Hoses, Install #58033 Hose Hanger

1

#57923 Hose Kit Cont’d

Route Hydraulic Hoses

1.Route hoses along loader mount, under the right side of the operator’s platform, and over the rear axle.

Be sure to avoid contact with 3-point linkage, brake pedals, and other moveable tractor components.

Hoses must be routed so they are not pinched, bent sharply, or chafed during operation. Hoses must not interfere with any tractor control operation or con- tact any moving parts.

2.Connect hydraulic hoses to tractor hydraulic couplers as shown in Figure 7.

/()7 6,'(		5,*+7 6,'(
+<'5$8/,&
		+<'5$8/,&
&21752/
		&21752/
￿￿￿￿￿￿￿
	'	%
	&
		$

Figure 7 Hose Connections to Tractor

Hydraulic Couplers

Install #58033 Hose Hanger

1.Install hose hanger bracket beneath right side of the operator’s platform as shown in Figure 8. Use cap screw, flat washers, and lock nut as shown in Figure 9.

2.Route hoses through support and secure with lock pin (15).

11.58033 Hose hanger bracket

12.6778 5/16 NC Lock nut

13.4378 5/16 Flat washer

14.6250 5/16 NC x 1-1/4 Cap screw

15.58047 1/4 x 2-1/2 Lock pin

+26( ￿￿￿￿￿￿￿

+$1*(5

Figure 8 #58033 Hose Hanger Installed

	￿￿
	￿￿
￿￿	￿￿
￿￿	￿￿

Figure 9 Hose Hanger Assembly

MAN0063 (12/15/00) Hydraulic Installation 13