Woods Equipment MAN0063 manual Loader Mount Installation, Tractor Preparation

LOADER MOUNT INSTALLATION

￿￿￿￿￿￿￿

CAUTION

■Only use #111876 Loader Mounting Kit for mounting Woods 1020/1027 loaders on Ford New Holland 2810, 2910, 3910 FWA & 3230, 3430, 3930, 4610, 4630 2WD & FWA, and 4000, 4100, 4110, 4600, 4610 all-purpose 2WD trac- tors. Any other use or modification of this mounting kit may result in serious injury or death.

■Safety instructions are important! Read all attachment and power unit manuals; follow all safety rules and safety decal information. (Replacement manuals are available from dealer or, in the United States and Canada, call 1-800-319-6637.) Failure to follow instructions or safety rules can result in serious injury or death.

■If you do not understand any part of this manual and need assistance, see your dealer.

■Always wear relatively tight and belted clothing to avoid entanglement in moving parts. Wear sturdy, rough-soled work shoes and protective equipment for eyes, hair, hands, hearing, and head.

IMPORTANT

■This equipment must be assembled and installed on the customer’s tractor by the Woods dealer. Dealer must thoroughly inspect equipment and complete each item on the

PRE-DELIVERY CHECK LIST, DELIVERY CHECK LIST, and WARRANTY REGISTRA- TION before equipment is released to the cus- tomer.

TRACTOR PREPARATION

For installing this mounting kit, references to right, left, forward, and rearward directions are deter- mined from the operator’s position in the tractor seat.

1.Shut off engine and set parking brake during installation.

2.Remove the tractor front weights and weight bracket if equipped.

3.Set tractor front wheel width to 61-1/2” (center line of thread) as instructed in tractor operator man- ual.

4.Remove cowl-mounted headlights if equipped.

MAN0063 (12/15/00) Mount Installation 7