Woods Equipment 1022120 manual Connect Hydraulic Hoses, Attach 3-Point Arms

Page 17

STORAGE

Connect Hydraulic Hoses

TRACTOR: Connect male quick coupler on end of hose to female quick coupler at bulkhead bracket when backhoe is removed from tractor. See Figure 28.

NOTICE

Failure to connect hoses together will result in damage to tractor hydraulic system.

BACKHOE: Connect IN and OUT quick couplers together to prevent dirt and debris from accumulating in quick couplers. See Figure 29.

DP21

Figure 28. Hose Connection - Backhoe Removed

DP15

Figure 29. Backhoe Hose Connection,

Storage Position (Typical)

Attach 3-Point Arms

Lower 3-point lift arms and anti-sway links can be used on tractor when backhoe is removed.

Attach 3-point lift arms anti-sway links to tractor as shown in Figure 30.

Secure anti-sway links to tractor using pin (19) and safety pin (18) provided in kit.

18.66649 Pin, safety .09 x 2.31 (not shown)

19.6737 Pin, 7/16 x 3/14

18

19

Figure 30. Right Anti-Sway Link Attached to Tractor

(Typical)

MAN0708 (4/11/2008)

Installation 17

 

 

Image 17
Contents MAN0708 To the Dealer IntroductionSafety Rules SafetySafety Rules from previous Tractor Preparation InstallationBackhoe SUB-FRAME Installation With Woods LS84 Loader Mount Install Front MountsInstall Tractor Brackets Install Rops BracketsDP6A Install Reinforcement Brackets Install Cross BraceAttach Backhoe Mounts to Backhoe Torque Mounting HardwareAssemble Bulkhead Bracket Hydraulic InstallationInstall Hydraulic Hoses Install Hydraulic Block and FittingsInstall Rear Tires Install Bulkhead Adapter on Backhoe MountInstall Hoses to Backhoe Valve Mount Backhoe Mount Backhoe to Tractor Check Hydraulic SystemRefer to Figure Mount Backhoe to TractorBackhoe Storage Position Remove Backhoe from TractorAttach 3-Point Arms Connect Hydraulic Hoses1022120 4-POINT SUB-FRAME Mounting KIT PartsPart QTY Description SUB-FRAME Mounting Parts ListHose KIT Appendix Bolt Torque ChartAbbreviations Bolt Size ChartWarranty Woods Equipment Company