Install Bulkhead Adapter on Backhoe Mount
1.Attach bulkhead adapter (1) to crossmember between backhoe brackets. Secure with nut sup- plied with adapter.
2.Attach elbow (10) and female quick coupler (16) to bulkhead adapter as shown in Figure 23.
3.Position elbow and quick coupler to point upward.
1.1006144 Adapter, Bulkhead 3/8 NPTM x 3/4 JICM
10.313017 Elbow, 3/8 NPTM x 3/8 NPTF 90°
16.64299 Quick coupler, female
Figure 23. Bulkhead Adapter Installation - Backhoe
Install Hoses to Backhoe Valve
NOTE: Some hydraulic fittings supplied in this hose kit may not be required for this application.
1.Attach hose (5) between the IN port on the back- hoe valve and the bulkhead adapter on the cross- member.
2.Attach male quick coupler (17) to hose (4).
3.Attach opposite end of hose (4) to the OUT port of backhoe valve.
4.1010924 Hose, 40" x 3/8 NPTM x 3/4 ORBM
5.1013479 Hose, 10" x 3/4 JICF x 3/4 ORBM
17.64300 Quick coupler, male
Figure 24. Backhoe Hose Connection
Install Rear Tires
When hydraulic hoses have been completely installed, install rear tires.
NOTE: On tractors equipped with Turf tires
Figure 25. Rear Tire Spacing
MAN0708 (4/11/2008) | Installation 13 |
|
|