Selecting the Cassette Type
NICAM ★(SV-665B/SV-661B/SV-662B/SV-661I Only)
GB
PTIONS |
|
|
OSD |
| :ON |
TAPE SELECT | :E180 | |
COLOUR SYSTEM | :AUTO | |
FORMAT 16:9 | :AUTO | |
NICAM |
| :ON |
ECO. MODE | :OFF | |
IPC |
| :ON |
❷ | ❿ | END:MENU |
PTIONS |
|
|
OSD |
| :ON |
| TAPE SELECT | :E180 |
| |
| COLOUR SYSTEM | :AUTO |
| |
| ECO. MODE | :OFF |
| |
| IPC | :ON |
| |
|
|
|
|
|
| ❷ ❿ | END: | MENU |
|
If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the type of cassette inserted.
1Press MENU on the remote control.
Result: The programming menu is displayed.
2Press the corresponding ,❷ or ➛, ❿ buttons to select the
USER SET option.
3Press the OK button to select this option.
4Press the corresponding or ❷ buttons, until the TAPE SELECT option is selected.
5Press the ➛ or ❿ buttons as many times as required, until the correct cassette length is displayed.
E180
E240
E 300 
E260
6Press MENU twice to exit the menu.
NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound.
Please refer to page 33.
1Press MENU on the remote control.
Result: The programming menu is displayed.
2Press the corresponding ,❷ or ➛, ❿ buttons to select the
USER SET option.
3Press the OK button to select this option. Result: The USER SET menu is displayed.
4Press the corresponding or ❷ buttons, until the NICAM option is selected.
5 | To... | Press ➛ or ❿, until... |
|
|
|
| Mono mode | OFF is displayed. |
|
| OFF: Only set at this position to record the |
|
| standard mono sound during a |
|
| NICAM broadcast if the stereo sound |
|
| is distorted due to inferior reception |
|
| conditions. |
GB
PROG | OPTIONS | INSTALL |
CLOCK | BONUS |
|
USER SET |
| |
❷➛❿ OK | END:MENU | |
PTIONS |
|
|
OSD |
| :ON |
TAPE SELECT | :E180 | |
COLOUR SYSTEM | :AUTO | |
FORMAT 16:9 | :AUTO | |
NICAM |
| :ON |
ECO. MODE | :OFF | |
IPC |
| :ON |
❷ | ❿ | END: MENU |
Selecting the Recording Speed
NICAM mode | ON is displayed. |
| ON: Normally set at this position. |
6On completion, press MENU twice to exit the menu.
Type | Recording Time (in SP) |
180 mins. or 3 hours | |
|
|
240 mins. or 4 hours | |
|
|
260 mins. or | |
| 4 hours and 20 mins. |
300 mins. or 5 hours | |||
|
| OK |
|
SPEED | DUB | TV/VCR | TIMER |
You can record a cassette at two different speeds:
◆SP (Standard Play)
◆LP (Long Play)
In Long Play modes:
◆Each cassette lasts twice as long
◆The recording is of a slightly lower quality
To record a cassette... | Press the SPEED button on the |
| remote control, until... |
In standard play mode | SP is displayed. |
In long play mode | LP is displayed. |
22
23