Recording from Another VCR or Camcorder

Using the Assemble Edit Function

Using the TV Buttons on the Remote Control ★(V-665B Only)

	2
REC	MENU

This function allows you to start a new recording at a specific position on the cassette while maintaining a very smooth scene change.

1Insert the cassette to be edited in your VCR.

2Press the ❿ll button to start playback.

3When you reach the position from which you wish to start the new recording, press the ❿ll button.

4Press the F.ADV ( F.ADV ) button again as often as necessary to advance frame by frame, until the exact recording position is located.

5While the VCR is in still mode, hold the REC button down for a while to activate the Assemble Edit function.

Result: Record symbol flashes in the display.

6Select the source from which you wish to record by pressing:

◆The PROG/TRK ( or ❷) / PROG ( or ❷) buttons for television channels

◆The INPUT button for the AV1, AV2 or AUX★ (SV-665B/ SV-661B/SV-662B/SV-661I only) input sources

7Press the ❿ll button to start recording.

8When you have finished recording, press ■ .

Your VCR remote control will work with Samsung televisions and compatible brands.

To determine whether your television is compatible, follow the instructions below.

1Switch your television on.

2Point the remote control towards the television.

3Hold down the TV button and enter the two-figure code corresponding to the brand of your television, by pressing the appropriate numeric buttons.

Brand	Codes	Brand	Codes

SAMSUNG	01 to 06	PHILIPS	02, 20, 22
AKAI	09, 23	SABA	13, 14, 22 to 24
GRUNDIG	09, 17, 21	SONY	15, 16
LOEWE	02	THOMSON	13, 14, 24
PANASONIC	08, 23 to 27	TOSHIBA	07, 16 to 19, 21

Result: If your television is compatible with the remote control, it is switched off. It is now programmed to operate with the remote control.

	VCR STANDBY/ON			TV STANDBY/ON
			SLOW
			SHUTTLE	1
			V-LOCK
	2
	CLR/RST		F.ADV	INDEX
	-/--
2	SELECT			INPUT
2	TV		VCR	INPUT
	CLR/RST	F.ADV		INDEX
	-/--
	SELECT			INPUT
3	TV	VCR		INPUT
3
			5	REPEAT
				4
AUDIO				DISP./
	VOL		PROG/TRK
			5
	TV		VCR	INPUT

➢	If several codes are indicated for your television brand, try
	each one in turn until you find one that works.

6	REPEAT
6
AUDIO	DISP./
VOL	PROG/TRK

REC

You can copy a cassette to your VCR from another video source, such as another VCR or a camcorder.

☛It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any form without the permission of the owners of the corresponding copyright.

1Connect the VCR, from which the cassette is to be copied, to the appropriate SCART audio and video input connectors on the rear of your VCR.

You can also use a RCA audio and video cable to connect the AUX input on the front of your VCR. ★(SV-665B/SV-661B/SV-662B/ SV-661I only)

2Insert a blank cassette in your VCR.

3Insert the pre-recorded cassette in the other video source (VCR or camcorder).

4Press the INPUT button to select the appropriate input on your VCR:

◆AV1 or AV2 ★(SV-665B/SV-661B/SV-662B/SV-661I only) for the SCART input

◆AUX for the RCA input ★(SV-665B/SV-661B/SV-662B/ SV-661I only)

5Start playing back the cassette to be copied.

6Hold REC down for a while to start recording on your VCR.

7When you have finished recording, press ■ on both VCRs.

➢If you wish to view the cassette being copied:

◆Your VCR must be connected as usual to the television (see page 12 for further details)

☛ When you change the batteries in the remote control, you

must reprogramme the code, following the same procedure.

You can then control the television using the following buttons.

Button		Function
TV STANDBY/ON ➀ Used to switch the television on and off.
TV or VCR ➁		Used to switch between the TV and VCR modes.
		Only the VOL (+ or – ) and TV STANDBY/ON
		buttons are operational in VCR mode.
-/-- ➂		Used to enter a two-figure programme number.
		Example: For programme 12, press -/-- followed
		by numeric buttons 1 and 2.
INPUT	➃	Used to select an external source.
VOL + or – ➄		Used to adjust the volume of the television.
PROG/TRK ➅		Used to select the required programme.
(or ❷)
DISP./	➆	Used to switch between an external source and
		the television tuner.

➢The various functions will not necessarily work on all televisions. If you encounter problems, operate the television directly.

	6
TV	VCR	INPUT
		REPEAT
AUDIO		DISP./
VOL	PROG/TRK
		7

Brand

Codes

TOSHIBA