Samsung SV-261I, SV-661I, SV-265B, SV-261B, SV-662B, SV-661B Recording a Programme Immediately

Protecting a Recorded Cassette

Recording a Programme with Automatic Stop

GB

1

Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape.

1If you wish to protect a cassette, break off the tab using a small screwdriver.

2To re-record over a protected cassette (safety tab broken), cover the hole with adhesive tape.

This function enables you to record up to nine hours (LP) of programmes.

Your VCR stops automatically after the requested length of time.

1	Switch on the television.
2	To monitor the programme being recorded, select the television
	channel reserved for use with your VCR (or the AV input if used).
3	Insert the cassette on which the programme is to be recorded,
	with the window visible and the safety tab intact or the opening

GB

3

		Recording a Programme Immediately
		★(SV-661B/SV-662B/		Before recording a programme, you must have preset the corres-
				ponding station (unless you are recording via an external video
		SV-661I/SV-265B/		source). If you have not done so, refer to pages 18 and 19.
		SV-261B/SV-262B/
★(SV-665B)
		SV-261I)
T		IPC	INPUT	1	Switch on the television.
VCR	INPUT
				2
	4		4		To monitor the programme being recorded, select the television
					channel reserved for use with your VCR (or the AV input if used).
REPEAT			REPEAT
	DISP./		DISPLA	3	Insert the cassette on which the programme is to be recorded,
PROG/TRK		K	PROG		with the window visible and the safety tab intact or the opening
					covered with adhesive tape.
			4		Result:			The VCR is switched on automatically.
	4			4	Select:
					◆ The station to be recorded using the PROG/TRK ( or ❷) /
						PROG ( or ❷) buttons
						or
					◆	The AV1, AV2 or AUX ★(SV-665B/SV-661B/SV-662B/
SPEED	DUB	TV/VCR	TIMER			SV-661I only) source using the INPUT button for a satellite
						tuner or external video source
	5				Result:			The station number is displayed and the programme
								can be seen on the television.
				5	Select the recording speed by pressing the SPEED button as
					many times as required (see page 22).
	TRK	PROG		6	Hold REC down for a while to start recording.
					Result:			The record indicator appears on the television and VCR
								display. An index is recorded on the tape (see page 36).
				7	To stop recording, press ■ once.
REC		7	MENU	➢
						◆ If your VCR ejects the cassette when you start
	6						recording, check to make sure that the cassette’s
							safety tab is intact or that the opening (created by a
							broken safety tab) is covered with adhesive tape.
						◆ If you reach the end of the tape while recording, the
							cassette rewinds automatically.

	covered with adhesive tape.
	Result: The VCR is switched on automatically.
4	Select:
	◆ The station to be recorded using the PROG/TRK ( or ❷) /
		PROG ( or ❷) buttons
		or
	◆ The AV1,		AV2 or AUX ★(SV-665B/SV-661B/SV-662B/
		SV-651I	only)
				source using the INPUT button for a satellite
		tuner or external video source

Result: The channel number is displayed and the programme can be seen on the television.

5Select the recording speed by pressing the SPEED button as many times as required (see page 22).

6Hold the REC button down for a while to start recording.

Result: The record indicator appears on the television screen and VCR display. An index is recorded on the tape (see page 36).

7Press the REC button several times to increase the recording time in:

◆30-minute intervals up to four hours

◆1-hour intervals up to nine hours (LP)

Result: The length is displayed on the television displays. The selected programme is recorded for the length of time requested. At the end of that time, the VCR stops recording automatically.

8If you wish to cancel the recording before the end, press VCR STANDBY/ON (STANDBY/ON).

☛If the end of the tape is reached while recording:

◆The recording stops

◆The VCR automatically turns off

		★(SV-661B/SV-662B/
		SV-661I/SV-265B/
		SV-261B/SV-262B/
★(SV-665B)		SV-261I)
T		IPC	INPUT
VCR	INPUT
	4		4
REPEAT			REPEAT
	DISP./		DISPLA
PROG/TRK		K	PROG
	4		4
SPEED	DUB	TV/VCR	TIMER
	5
REC			MENU
	6
		OK

LENGTH 2:30

SET LENGTH :

PRESS REC

24

25