Inserting Batteries in the Remote Control
Displaying/Hiding
GB
1 |
You must insert or replace the batteries in the remote control when you:
◆Purchase the video cassette recorder
◆Find that the remote control is no longer working correctly
1Push the tab in the direction of the arrow to release the battery compartment cover on the rear of the remote control.
2Insert two AA, R6 or equivalent batteries, taking care to respect the polarities:
◆+ on the battery with + on the remote control
◆– on the battery with – on the remote control
3Replace the cover by aligning it with the base of the remote control and pushing it back into place.
➢Do not mix different battery types (manganese and alkaline for example).
Your VCR displays most information both on the VCR and the television.
You can choose to display or hide this information on the television screen (except for the Index, Programming MENU and
VIDEOPLUS+ functions
1Press MENU on the remote control.
Result: The programming menu is displayed.
2Press the corresponding ,❷ or ➛, ❿ buttons to select the
USER SET option.
3Press the OK button to select this option. Result: The USER SET menu is displayed.
4Press the corresponding or ❷ buttons, until the OSD option is selected.
5 | To... | Press ➛ or ❿, until... |
|
|
|
| Display | ON is displayed. |
GB
PTIONS |
|
|
OSD |
| :ON |
TAPE SELECT | :E180 | |
COLOUR SYSTEM | :AUTO | |
FORMAT 16:9 | :AUTO | |
NICAM |
| :ON |
ECO. MODE | :OFF | |
IPC |
| :ON |
❷ | ❿ | END:MENU |
PTIONS |
|
|
OSD |
| :ON |
TAPE SELECT | :E180 |
COLOUR SYSTEM | :AUTO |
ECO. MODE | :OFF |
IPC | :ON |
Setting the Date and Time
Hide | OFF is displayed. |
|
|
❷ ❿ | END: | MENU |
|
REC |
| 2 | MENU |
|
|
| |
|
|
| 1 |
2 | OK |
| 2 |
|
| 3 |
|
Your VCR contains a
◆Automatically stop programme recording
◆Preset your VCR to record a programme automatically
You must set the date and time when:
| ◆ You purchase the video cassette recorder |
☛ | ◆ The time and date are set automatically from the |
6On completion, press MENU twice to exit the menu.
Setting the VCR Output Channel
2 |
PROG | OPTIONS | INSTALL |
CLOCK | BONUS |
|
|
| |
CLOCK SET |
| |
❷➛❿ OK | END:MENU | |
CLOCK |
|
12:00 | 1/JAN/2003 |
| WED |
AUTO CLOCK : ON | |
➛❿❷ | END: MENU |
broadcast signal. If the signal is weak or ghosting |
occurs, the time and date may not be set automati- |
cally. In this case, they should be set manually. |
◆ Do not forget to reset the time when you change |
clocks from winter to summer time and vice versa. |
1Press MENU on the remote control.
Result: The programming menu is displayed.
2Press the corresponding , ❷ or ➛, ❿ buttons to select the
CLOCK SET option.
3Press the OK button to select this option. Result: The CLOCK SET menu is displayed.
4Press ➛ or ❿ to select the hour, minutes, day, month and year. Result: The option selected flashes.
5Press the or ❷ buttons to increase or decrease the value. Result: The day of the week is displayed automatically.
➢You can hold the or ❷ buttons down to scroll more quickly through the values.
6On completion, press MENU twice to exit the menu.
Your VCR output channel may need to be changed if the pictures suffer from interference or if your TV cannot find the pictures. Also, you can change the VCR output channel to adjust the frequency in which information is displayed on the screen.
1Press MENU on the remote control.
Result: The programming menu is displayed.
2Press the corresponding , ❷ or ➛, ❿ buttons to select the
INSTALLATION option.
3Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4 | Press the corresponding or ❷ buttons, until the VCR OUTPUT |
| CH option is selected. |
|
|
5Select the required output channel (CH21~CH69) by pressing the ➛ or ❿ buttons.
6On completion, press MENU twice to exit the menu. Then tune your television again (see page 15).
PROG | OPTIONS | INSTALL |
CLOCK | BONUS |
|
INSTALLATION | ||
❷➛❿ OK | END: MENU | |
INSTALL |
|
|
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH60
❷ ❿ | END: | MENU |
|
16 |
17