NICAM
Protecting a Recorded Cassette
GB
PROG OPTIONS INSTALL
CLOCK BONUS
USER SET
"❷!!➛❿!! OK | END: MENU |
NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound.
Please refer to page 32.
1 | Press MENU on the remote control. | |
| Result: | The programming menu is displayed. |
|
| |
2 | Press the corresponding ",❷ or ➛, ❿ buttons to select the | |
| USER SET option. | |
|
| |
3 | Press the OK button to select this option. | |
| Result: | The USER SET menu is displayed. |
Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape.
1If you wish to protect a cassette, break off the tab using a small screwdriver.
2To
GB
1 |
OPTIONS |
|
OSD | :ON |
TAPE SELECT | :E180 |
COLOUR SYSTEM | :AUTO |
FORMAT 16:9 | :AUTO |
4 | Press the corresponding " or ❷ buttons, until the NICAM option |
| is selected. |
Recording a Programme Immediately
| NICAM | :ON |
| |
| ECO. MODE | :OFF |
| |
| IPC | :ON |
| |
| "❷ ❿ | END: | MENU |
|
5 | To... | Press ➛ or ❿, until... |
|
|
|
| Mono mode | OFF is displayed. |
|
| OFF: Only set at this position to record the |
|
| standard mono sound during a |
|
| NICAM broadcast if the stereo sound |
|
| is distorted due to inferior reception |
|
| conditions. |
|
|
|
| NICAM mode | ON is displayed. |
|
| ON: Normally set at this position. |
6On completion, press MENU twice to exit the menu.
Before recording a programme, you must have preset the corres- ponding station (unless you are recording via an external video source). If you have not done so, refer to pages 17 and 18.
1Switch on the television.
2To monitor the programme being recorded, select the television channel reserved for use with your VCR (or the AV input if used).
3Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape.
Result: The VCR is switched on automatically.
4Select:
◆The station to be recorded using the PROG (" or ❷) buttons or
◆The AV1, AV2 or AUX
Result: The station number is displayed and the programme can be seen on the television.
5Select the recording speed by pressing the SPEED button as many times as required (see page 21).
6Hold REC down for a while to start recording.
Result: The record indicator appears on the television and VCR display. An index is recorded on the tape (see page 35).
7To stop recording, press ■ once.
➢◆ If your VCR ejects the cassette when you start recording, check to make sure that the cassette’s safety tab is intact or that the opening (created by a broken safety tab) is covered with adhesive tape.
◆If you reach the end of the tape while recording, the cassette rewinds automatically.
REPEAT
AUDIODISPLAY
TRK 4 PROG
4
SPEED | DUB | TV/VCR | TIMER |
| 5 |
|
|
| TRK | PROG |
|
REC | 7 |
MENU | |
| 6 |
22
23