Recording a Programme with Automatic Stop

Recording a Programme with Automatic Stop

	3
A.TRK	IPC	INPUT
		4
AUDIO		DISPLAY
TRK 4		PROG
4

SPEED	DUB	TV/VCR	TIMER
	5

REC

LENGTH 2:30

SET LENGTH :

PRESS REC

This function enables you to record up to nine hours (LP) of programmes.

Your VCR stops automatically after the requested length of time.

1Switch on the television.

2To monitor the programme being recorded, select the television channel reserved for use with your VCR (or the AV input if used).

3Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape.

Result: The VCR is switched on automatically.

4Select:

◆The station to be recorded using the PROG (" or ❷) buttons or

◆The AV1, AV2 or AUX ★(SV-645B only) source using the INPUT button for a satellite tuner or external video source

Result: The channel number is displayed and the programme can be seen on the television.

5Select the recording speed by pressing the SPEED button as many times as required (see page 21).

6Hold the REC button down for a while to start recording.

Result: The record indicator appears on the television screen and VCR display. An index is recorded on the tape (see page 35).

7Press the REC button several times to increase the recording time in:

◆30-minute intervals up to four hours

◆1-hour intervals up to nine hours (LP)

Result: The length is displayed on the television displays. The selected programme is recorded for the length of time requested. At the end of that time, the VCR stops recording automatically.

8If you wish to cancel the recording before the end, press

STANDBY/ON.

☛If the end of the tape is reached while recording:

◆The recording stops

◆The VCR automatically turns off