Intelligent Picture Control
Format 16:9 (Wide Screen)
PROG OPTIONS INSTALL
CLOCK BONUS
USER SET
"❷!!➛❿!! OK | END: MENU | |
OPTIONS |
|
|
OSD |
| :ON |
TAPE SELECT | :E180 | |
COLOUR SYSTEM | :AUTO | |
FORMAT 16:9 | :AUTO | |
NICAM |
| :ON |
ECO. MODE | :OFF | |
IPC |
| :ON |
"❷ | ❿ | END: MENU |
The Intelligent Picture Control Feature allows you to adjust the sharpness of the image automatically, according to your own preferences.
1 | During playback, press the MENU button on the remote control. | |
| Result: | The programming menu is displayed. |
|
| |
2 | Press the corresponding ",❷ or ➛, ❿ buttons to select the | |
| USER SET option. | |
3 | Press the OK button to select this option. | |
| Result: | The USER SET menu is displayed. |
4 | Press the corresponding " or ❷ buttons, until the IPC option is | |
| selected. |
|
5 | Press the ❿!button to select the IPC (intelligent picture control) | |
| option. |
|
| ➢ When intelligent picture control mode is ON, the sharpness | |
| of the image is adjusted automatically. | |
|
| |
6 | To adjust the sharpness manually, press the ❷ button to turn the | |
| IPC mode OFF. | |
7 | Press the ➛ or ❿ buttons until the picture is displayed according to | |
| your preferences. | |
| ➢ If you do not press a button within ten seconds, the | |
| PICTURE menu disappears automatically. | |
|
|
|
Your VCR can automatically play Wide Screen format prerecorded tapes. It can also record Wide Screen format programmes received from sources such as a satellite receiver.
☛Connect equipment compatible with Wide Screen to the VCR using the 21 pin SCART cable.
1Press MENU on the remote control.
Result: The programming menu is displayed.
2Press the corresponding ",❷ or ➛, ❿ buttons to select the
USER SET option.
3Press the OK button to select this option. Result: The USER SET menu is displayed.
4Press the corresponding "or ❷ buttons, until the FORMAT 16:9 option is selected.
5Press the ❿!!button to select AUTO ➝ ON ➝ OFF.
AUTO Set when you use a wide TV. The VCR automatically detects if programmes being played back or recorded are in normal or Wide Screen format.
ON The VCR always plays back and records in 16:9 Wide Screen format. Set if the VCR cannot detect Wide Screen TV programmes with “AUTO” set.
OFF Set if you do not use a Wide Screen TV.
6On completion, press MENU twice to exit the menu.
GB
OPTIONS
PROG OPTIONS INSTALL
CLOCK BONUS LANG
USER SET
"❷!!➛❿!! OK | END:MENU | |
OPTIONS |
|
|
OSD |
| :ON |
TAPE SELECT | :E180 | |
COLOUR SYSTEM | :AUTO | |
FORMAT 16:9 | :AUTO | |
NICAM |
| :ON |
ECO. MODE | :OFF | |
IPC |
| :ON |
"❷ | ❿ | END:MENU |
8 On completion, press the MENU button again. |
Selecting the Colour Mode
Before recording or playing back a cassette, you can select the required system standard.
Otherwise, the system automatically selects the reception standard when you select AUTO.
CLR/RST F.ADV INDEX
A.TRK IPC INPUT
REPEAT
1
AUDIODISPLAY
TRK PROG
** PICTURE **
IPC : OFF
SOFTEN SHARPEN
➛❿ON/OFF:❷
1During playback, press the IPC button. Result: The PICTURE menu is displayed.
2Press the ❷ button to turn the IPC (Intelligent Picture Control) option ON and OFF.
➢When Intelligent Picture Control mode is ON, the sharpness of the image is adjusted automatically.
3To adjust the sharpness manually, select Intelligent Picture Control mode OFF.
◆ The horizontal picture adjusting appears.
4Press the ➛ or ❿ buttons until the picture is displayed according to your preferences.
➢If you do not press a button within ten seconds, the PICTURE menu disappears automatically.
5On completion, press the IPC button again.
➢◆ When playing back a cassette, the standard is automatically selected by the VCR.
◆When you playback an
If your TV is Multi System TV (NTSC 4.43 compatible), set NT4.43 and you can record NT4.43.
1Press MENU on the remote control.
Result: The programming menu is displayed.
2Press the corresponding ",❷ or ➛, ❿ buttons to select the
USER SET option.
3Press the OK button to select this option. Result: The USER SET menu is displayed.
4Press the corresponding "or ❷ buttons, until the COLOUR SYSTEM option is selected.
5Press the ❿ button to select AUTO ➝ PAL ➝ B/W.
AUTO When playing back a cassette, the system standard is automatically selected by the VCR.
B/W Black and White
6On completion, press MENU twice to exit the menu.
OPTIONS
PROG OPTIONS INSTALL
CLOCK BONUS LANG
USER SET
"❷!!➛❿!! OK | END:MENU | |
OPTIONS |
|
|
OSD |
| :ON |
TAPE SELECT | :E180 | |
COLOUR SYSTEM | :AUTO | |
FORMAT 16:9 | :AUTO | |
NICAM |
| :ON |
ECO. MODE | :OFF | |
IPC |
| :ON |
"❷ | ❿ | END:MENU |
30
31