Samsung SV-643B, SV-645B instruction manual If you wish to Then

Modifying VIDEOPLUS+ Programming

★(SV-645B/SV-643B Only)

Using the Timer Programming Feature

If you wish to correct the programme displayed or modify certain elements, such as the recording speed, you can do so before you press MENU a second time to confirm.

If you wish to...	Then...
Select an input source other	◆	Press the ➛ or ❿ buttons, until the PR selection flashes.
than the tuner (AV1, AV2 or	◆ Press the INPUT button one or more times to change the
AUX ★(SV-645B only))			input source selection.
		Result:		The programme number is replaced by:
				• The AV1, AV2 or		source
					AUX ★(SV-645B only)
				using the INPUT	button for a satellite tuner or
				external video source
	➢ The input source must be selected before changing any
			other value.
Record a programme every day	◆	Press the ➛ or ❿ buttons, until the DAY selection flashes.
(Monday to Sunday) at the same time	◆ Press the "or ❷ buttons, until the DLY (Daily) value is
		displayed.
Record a programme every week	◆	Press the ➛ or ❿ buttons, until the DAY selection flashes.
on the same day and at the same time	◆ Press the "or ❷ buttons, until the W- (Week) value is
		displayed, followed by the required day.
		Example: W-SA(Weekly Saturday)
Extend the recording time	◆	Press the ➛ or ❿ buttons, until the STOP selection flashes.
	◆ Press the "or ❷ buttons to increase or decrease the stop
		time.
Select the recording speed	◆	Press the ➛ or ❿ buttons, until the recording speed selection
		flashes.
	◆ Press the "or ❷ buttons until the correct indication is
		displayed:
		• AUTO (Auto Tape Speed Select) : see page 27
		•	SP (Standard Play)
		•	LP (Long Play)
Select the PDC recording	◆	Press the ➛ or ❿ buttons, until the V/P selection flashes.
	◆ Press the "or ❷ buttons until the “ON” indication is displayed.
	☛		Do not select PDC unless you are sure the programme you

wish to record is broadcast with PDC. If you do set PDC ON (by selecting “ON” in the right - hand column on the screen), then you must set up the start-time EXACTLY according to the published TV schedule. Otherwise the timer recording won’t take place.

The Timer Programming feature allows you to preset the VCR to record a programme up to one month before that programme is to be broadcast. Up to six programmes can be preset.

☛ Before presetting a recording, check that the date and time are correct.

1 - Insert the cassette. Press the TIMER button.

Press the "or ❷ buttons to select the STANDARD option and then press the ❿!button or,

◆Press MENU on the remote control.

Result: The programming menu is displayed.

◆Press the OK button to select TIMER PROGRAMMING option. Result: The TIMER PROGRAMMING menu is displayed.

2Press ❿!to select the input source.

3Select the required station by pressing the ", ❷ buttons or INPUT to select the AV1, AV2 or AUX ★(SV-645B only) input sources.

4Press ❿ to select the recording day.

5Select the required day by pressing the "or ❷ buttons.

6Press ❿ to select the recording start time.

7Select the required hour value by pressing the "or ❷ buttons.

8Press ❿ to select the minutes.

9Select the required minute value by pressing the "or ❷ buttons.

10Press ❿ to select the recording end time.

11Select the required recording end time by pressing the "or ❷ buttons, following the same procedure as when selecting the recording start time.

12Press ❿ to select the recording speed.

13Press the " or ❷ buttons to select the SP (Standard Play), LP (Long Play), AUTO (Auto Tape Speed Select) recording speeds.

14Press ❿ to select the PDC recording mode.

15Press the "or ❷ buttons to toggle between the PDC mode (marked ON) and the non-PDC mode (marked -).

16When you have finished, press the MENU button.

17Press the STANDBY/ON button to activate the timer.

Result: Before starting recording, the VCR compares the timer duration with the remaining time on the cassette.

➢Auto Tape Speed Select. The VCR’s “Auto Tape Speed Select” function compares the duration of the timer recording to the actual recording time remaining on the tape loaded. If there is insufficient tape to complete a timer recording in AUTO mode, the VCR automatically switches to LP mode to record the whole programme.

GB

★(SV-645B/SV-643B)

**TIMER METHOD **

STANDARD

VIDEOPLUS

"❷ ❿ END: MENU

PROGPROG OPTIONS INSTALL

CLOCK BONUS LANG

TIMER PROGRAMMING

"❷!!➛❿!! OK END: MENU

PROG	1/JAN MON	21:28
PR DAY	START→ STOP		V/P
1 MO 1 12:00→ 12:50SP ON
-- ---- --:--→--:----			-
-- ---- --:--→--:----			-
-- ---- --:--→--:----			-
-- ---- --:--→--:----			-
-- ---- --:--→--:----			-
"❷ ➛❿
DELETE:CLR/RST		MENU

STANDBY/ON EJECT

17SLOW

SHUTTLE

26 27