![](/images/new-backgrounds/1163992/16399229x1.webp)
Using the VIDEOPLUS+ Feature ★(SV-645B/SV-643B Only)
Before presetting your VCR:
◆Switch on both the television and your VCR
◆Check that the date and time are correct
◆Insert the cassette on which the programme is to be recorded (safety tab intact)
Up to six programmes can be preset.
1Press the TIMER button.
Result: The TIMER METHOD is displayed.
2Press the corresponding " or ❷ buttons, until the VIDEOPLUS option is selected.
3Press the ❿!button to select VIDEOPLUS.
Result: A message is displayed to allow you to enter the VIDEOPLUS+ code.
☛If all six programmes have been set, the message TIMER IS FULL is displayed. Refer to page 28 if you wish to cancel a preset recording.
4Press the numeric buttons to enter the code opposite the programme that you wish to record in your television magazine.
➢ If you wish to correct the VIDEOPLUS+ code that you are entering:
◆Press the ➛ button until the digit to be corrected is cleared
◆Enter the correct digit
5Press the MENU button.
Result: The information concerning the programme is displayed.
☛When using the VIDEOPLUS+ function for the first time with stored stations, the programme number flashes. This one time, you must enter the station number manually by pressing the "or ❷ buttons. Refer to the following page if:
◆The programme number or times flash
◆You wish to modify the programme
6If the programme and times are correct, press the MENU button.
7Press the STANDBY/ON button to activate the timer.
8Refer to page 28 if you wish to:
◆ Check that your VCR has been programmed correctly ◆ Cancel a preset recording
☛The numbers next to each TV programme listing are VIDEOPLUS+ code numbers, which allow you to programme your videorecorder instantly with the remote control. Tap in the VIDEOPLUS+ code for the programme you wish to record.
™VIDEOPLUS+ is a trademark of Gemstar Development Corporation. The VIDEOPLUS+ system is manufactured under licence from Gemstar Development Corporation.
GB
SPEED | DUB | TV/VCR | TIMER |
|
|
| 1 |
** TIMER METHOD **
STANDARD
VIDEOPLUS
"❷ ❿END: MENU
VIDEOPLUS
CODE
END:MENU
PROG | 1/JAN MON | 21:28 | |
PR DAY | START→ STOP |
| V/P |
1 MO 1 12:00→ 12:50SP ON | |||
- | |||
- | |||
- | |||
- | |||
- | |||
"❷ ➛❿ |
|
|
|
DELETE:CLR/RST | MENU |
STANDBY/ON | EJECT |
7SLOW
SHUTTLE![](/images/new-backgrounds/1163992/16399229xi3.webp)
25