Checking a Preset Recording Playing a Cassette

Checking a Preset Recording

Playing a Cassette

You can check your preset recordings:

This function allows you to play back any pre-recorded cassette.

PROG	1/JAN MON	21:28
PR DAY	START→ STOP		V/P
1 MO 1 12:00→ 12:50SP ON
-- ---- --:--→--:----			-
-- ---- --:--→--:----			-
-- ---- --:--→--:----			-
-- ---- --:--→--:----			-
-- ---- --:--→--:----			-
"❷		SET:❿
DELETE:CLR/RST		MENU

◆ When you have finished presetting the VCR

◆ If you have forgotten which programmes will be recorded

1 - Insert the cassette. Press the TIMER button.

Press the "or ❷ buttons to select the STANDARD option and then press the ❿!button or,

◆Press MENU on the remote control.

Result: The programming menu is displayed.

◆Press the OK button to select TIMER PROGRAMMING option. Result: The TIMER PROGRAMMING menu is displayed.

2Press the "or ❷ buttons to select the required programme.

3Press the ➛ or ❿ buttons to select and change any values as required. For more details, refer to the previous page.

4On completion, press MENU twice.

1Switch on both the television and your VCR.

2Insert the video cassette to be played. If the safety tab on the cassette is intact, press ❿ll.

Otherwise, the cassette is played automatically.

➢When a cassette is loaded, the tape position is optimized automatically to reduce disturbance (Digital Auto Tracking). When playing a cassette, if the end of the tape is reached, the cassette is rewound automatically.

NTSC tapes can be played back but cannot be recorded with this VCR.

3	To...	Then press...

	Stop the playback	■ (STOP).

	Eject the cassette		(EJECT).

3	2
REC	MENU

Adjusting Picture Alignment Automatically

Cancelling a Preset Recording

You can cancel any programmes that are:

The Picture Alignment feature enables you to optimize the tape position automatically to obtain the best possible picture.

When noise bars or streaks appear during playback, adjust picture

A.TRK IPC INPUT

PROG	1/JAN MON	21:28
PR DAY	START→ STOP		V/P
1 MO 1 12:00→ 12:50SP ON
-- ---- --:--→--:----			-
-- ---- --:--→--:----			-
-- ---- --:--→--:----			-
-- ---- --:--→--:----			-
-- ---- --:--→--:----			-
"❷		SET:❿
DELETE:CLR/RST		MENU

	◆	Incorrect
	◆	No longer required

1	-	Insert the cassette. Press the TIMER button.
		Press the "or ❷ buttons to select the STANDARD option and
		then press the ❿!button or,

◆ Press MENU on the remote control.

Result: The programming menu is displayed.

◆ Press the OK button to select TIMER PROGRAMMING option.

alignment by pressing the A.TRK button.

Result: ◆ The tracking bar appears.

◆The picture is automatically adjusted.

◆The tracking bar disappears when digital auto tracking has been completed.

REPEAT

AUDIODISPLAY

TRK PROG

Result: The TIMER PROGRAMMING menu is displayed.

Adjusting Picture Alignment Manually

CLR/RST F.ADV INDEX

A.TRK

3 IPC

INPUT

REPEAT

AUDIODISPLAY

2Select the programme to be cancelled by pressing the " or ❷ buttons.

3Press the CLR/RST button to cancel the selected programme. Result: All the recording information is deleted and the broad-

cast will not be recorded.

4On completion, press MENU twice.

The Picture Adjustment feature allows you to adjust the alignment manually to obtain the best possible picture.

When noise bars or streaks appear during playback, adjust alignment manually by pressing the TRK ( or ) buttons until the picture is clear and stable.

Result: ◆ The tracking bar appears.

◆The image is adjusted.

◆The tracking bar disappears when you release the button.

A.TRK IPC INPUT

REPEAT

AUDIODISPLAY

TRK PROG