Yamaha DVD-S661 Video connections, Component video jacks a, Video jack B, Composite video jack C

Connections

Video connections

If your AV receiver has video output jacks, connect your receiver and then your TV so that you can use one TV for several different video sources (LD, VCR, etc.) by simply switching the input source selector of your receiver.

This unit has several types of video output jacks. Use the one that corresponds to the input jacks of the component to be connected.

PR	COMPONENT Y		VIDEO
COAXIAL		PB	S VIDEO
AUDIO OUT DIGITALOUT		VIDEO	OUT

This unit	PB		S
PR		Y		V
				Video pin
				cable
<A>		<B>	<C>	(supplied)
PR	PB	Y	S	V
PR	PB	Y

COMPONENT	S VIDEO	VIDEO
VIDEO IN	INPUT	INPUT

AV receiver

VIDEO	COMPONENT	S VIDEO
OUT	VIDEO OUT	OUT
VIDEO	COMPONENT	S VIDEO
IN	VIDEO IN	IN

TV

Component video jacks <A>

Component video connections achieve higher fidelity color reproduction than S-video connections by transmitting video signals on separate wires for luminance (Y: green) and chrominance (PB: blue, PR: red).

Connect the VIDEO OUT - COMPONENT (Y, PB, PR) jacks of this unit to component input jacks of your AV receiver and then to those of your TV using a commercially available component cable. Observe the color of each jack when you make connections.

If your receiver does not have component output jacks, you can achieve a better video image by connecting the component output jacks of this unit directly to the component input jacks of your TV.

S-video jack <B>

S-video connections achieve a clearer picture than composite video connections by transmitting video signals on separate wires for luminance (Y) and chrominance (C). Connect the VIDEO OUT - S VIDEO jack of this unit to an S-video input jack of your AV receiver and then to that of your TV using a commercially available S-video cable.

Composite video jack <C>

Connect the VIDEO OUT - VIDEO jack of this unit to a video input jack of your AV receiver and then to that of your TV using the supplied video pin cable.

English

9En