Yamaha DVD-S661 manual Audio setup menu, Setting the digital output, Setting the analog output

Setup Menu

Audio setup menu

1Press SET UP.

2Press 2 / 3 to select “AUDIO SETUP PAGE”.

3Press ENTER.

AUDIO SETUP PAGE

ANALOG OUTPUT

DIGITAL AUDIO

HDMI AUDIO

NIGHT MODE

LIP SYNC

Setting the digital output

The [DIGITAL AUDIO] options are: [DIGITAL OUTPUT] and [LPCM OUTPUT].

1In “AUDIO SETUP PAGE”, press 5/a to highlight [DIGITAL AUDIO], and then press 3.

2Press 5/a to highlight an option.

3Press 3 to open a submenu.

DIGITAL OUTPUT

Set the digital output according to your optional audio component connections.

OFF

English

Setting the analog output

Set the analog output to match the playback capability of this unit.

1In “AUDIO SETUP PAGE”, press 5/a to highlight [ANALOG OUTPUT], and then press 3.

STEREO

Select this to change channel output to stereo, which only delivers sound from the two front speakers.

LT/RT

Select this if this unit is connected to a Dolby Pro Logic decoder.

2Press 5/a to select a setting, and then press ENTER.

Select this to turn off the digital output.

ALL

Select this if you have connected the digital audio output jack to a multi-channel decoder/ receiver.

MPEG ➜ PCM

Select this if your receiver is not capable of decoding MPEG audio signals.

PCM ONLY

Select this only if your receiver is not capable of decoding multi-channel audio signals.

LPCM OUTPUT

Select this if you have connected this unit to a PCM-compatible receiver via a digital terminal, such as the coaxial terminal. In this case, you may need to adjust [LPCM OUTPUT].

Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality.

25En