Troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center.
Problem |
|
|
| Solution |
No power | Connect the AC power cable properly. | |||
|
|
| ||
| Press STANDBY/ON on the front panel to turn on the power. | |||
|
|
| ||
No picture | Refer to the manual supplied with your TV to select the video input | |||
| channel correctly. Change the TV channel until you see the DVD | |||
| screen. |
| ||
|
|
|
| |
| Turn on your TV. |
| ||
|
|
|
| |
| Check the video connection. |
| ||
|
|
| ||
| Video signals other than HDMI signals are not output when HD JPEG | |||
| pictures are displayed (see “HD JPEG” on page 31). | |||
|
|
| ||
No picture is displayed when | Follow the steps below to change the [HDMI VIDEO] to [AUTO]. | |||
you make HDMI connections | 1. | Press OPEN/CLOSE ( |
| ) on the front panel or press and hold 7 |
(using the HDMI jacks) |
| on the remote control to open the disc tray. | ||
| 2. | Press 2 on the remote control. | ||
| 3. | Press SUBTITLE on the remote control. | ||
|
|
| ||
No picture is displayed when | Follow the steps below to turn off the progressive scan. | |||
you do not use progressive | 1. | Press OPEN/CLOSE ( |
| ) on the front panel or press and hold 7 |
scan connections (using the |
| on the remote control to open the disc tray. | ||
component video jacks) | 2. | Press 2 on the remote control. | ||
| 3. | Press ZOOM on the remote control to deactivate the progressive | ||
|
| scan. |
| |
|
|
| ||
Completely distorted picture or | Check that the disc is compatible with this unit (see “Playable disc | |||
black/white picture or no | formats” on page 3). |
| ||
picture |
|
| ||
Check that the TV type of this unit is set to match that of the disc and | ||||
| your TV (see “Setting a color system for your TV” on page 13). Follow | |||
| the steps below to change the setting of [TV TYPE]. | |||
| 1. | Press OPEN/CLOSE ( |
| ) on the front panel or press and hold 7 |
|
| on the remote control to open the disc tray. | ||
| 2. | Press 3 on the remote control. | ||
| 3. | Press AUDIO on the remote control. | ||
|
|
| ||
Distorted picture | Occasionally, a small amount of picture distortion may appear | |||
| depending on the disc being played back. This is not a malfunction. | |||
|
|
| ||
The screen size looks | Check that the TV setting of this unit matches the screen size of your | |||
unnatural, or the caption is | TV (see “Setting the TV display” on page 27). | |||
displayed only partially on the |
|
| ||
Change the screen size and the aspect ratio of your TV. | ||||
TV monitor or is not displayed |
|
|
|
|
at all |
|
|
|
|
|
|
|
|
|
36En