Connections & Setup
Jacks on the Back of Your TV/VCR
If you are connecting many components, please consult the manual that came with each component for connection instructions. The picture of your TV/VCR’s back panel describes the jacks on the back of your TV/VCR and what types of components that you can connect to these jacks.
When connecting, make sure you connect Output jacks to Input jacks, Video to Video, etc.
Audio and Video Input Jacks:
Connect any of the following components:
• DVD Player | • Satellite Receiver |
•Laserdisc Player • Internet Access Device
To watch the content from the component that’s connected to the VIDEO Input Jack, press the INPUT button on the remote until LINE 1 appears
TV/VCR back panel
VIDEO
UHF/ | AUDIO | |
VHF | ||
| ||
| OUT LINE 1 |
UHF/VHF Jack
Connect a coaxial cable that carries the signal from the antenna, cable, or cable box to the UHF/VHF jack.
Audio and Video
Output Jacks:
Connect an audio and video cable to these jacks to output the sound and video to another component.
8 | Chapter 1 |