CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)
If using this unit to play a DVD disc in a 5.1 channel Dolby Digital surround format, the unit outputs a DOLBY DIGITAL Data stream from its AUDIO OUT COAXIAL jack. By hooking the unit up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and
Use audio coaxial digital cables (commercially available) for the audio connections.
Center
speaker
Front speaker (left)
Dolby Digital decoder
Surround
speaker (left)
Front speaker | ANT. |
| AUDIO OUT | (OUT) |
|
| COAXIAL | ||
(right) |
|
|
|
|
|
|
| To AUDIO OUT |
|
|
|
| COAXIAL jack |
|
To Coaxial digital |
| (Only DVD AUDIO OUT) | ||
|
|
| ||
Audio input jack |
|
|
| |
Surround | Subwoofer | (IN) | Audio coaxial digital cable |
|
speaker |
|
| (commercially available) |
|
(right) |
|
|
|
|
|
|
|
| [Fig. 7] |
NOTES:
•Be sure to turn off the power to all components in the system before connecting another component.
•Refer to the Owner’s Manuals for the components to be connected to the unit.
•If connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “BITSTREAM” for audio output in the setup mode. (Refer to page 43.)
•Unless connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “PCM” for audio output in the setup mode. Playing a unit using incorrect settings may generate noise distortion and may also damage the speakers. (Refer to page 43.)
Manufactured under license from Dolby Laboratories. “Dolby” and the
- 14 - | EN |