SEARCH
Make sure ...
•The unit must be turned on.
•Insert a tape.
ZERO RETURN
TV/VCR
This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding.
NOTE:
•Zero Return WILL NOT work on a blank tape or a blank portion of a tape.
1Stop a tape at your desired point
Rewind or fast forward the tape to the beginning point at which you want to review.
2Reset the counter to 0:00:00
Hit [C.RESET] repeatedly.
3Begin recording or playback
Press [RECORD] or [PLAY O].
Hit [STOP C] when recording or playback is com- pleted.
NOTE:
•Tapes recorded in the SP or LP mode will normally display a noise bar on the TV screen and the pic- ture may revert to Black and White.
3Return to normal speed
Hit [PLAY O].
TIME SEARCH
TV/VCR
The Time Search function makes it possible to quick- ly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip.
NOTE:
•Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time.
In the example below: To watch a program before/ after 2 hour 50 minutes from the present position, in either direction.
1 Select “TIME SEARCH” | - TV/VCR SETUP - |
TIMER PROGRAMMING | |
Hit [SETUP]. | SETTING CLOCK |
CHANNEL SET UP | |
Press [K / L] to point to “TIME | USER’S SET UP |
LANGUAGE [ENGLISH] | |
SEARCH”, then hit [ENTER]. | CAPTION [OFF] |
ZERO RETURN | |
B TIME SEARCH | |
| INDEX SEARCH |
4To activate “ZERO RETURN”
Hit [SETUP].
Press [K / L] to point to “ZERO RETURN”, then hit [ENTER]. The unit will begin rewinding and the counter will appear on the TV screen.
- TV/VCR SETUP -
TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER’S SET UP
BZERO RETURN TIME SEARCH INDEX SEARCH
2 Enter your desired time |
|
Press [K / L] until your desired time | TIME SEARCH |
2 : 50 | |
appears. (Example: “2:50” stands for |
|
2 hours 50 minutes) |
|
If you wish to cancel the Time |
|
The tape will automatically stop when the counter returns to 0:00:00 (approx.).
PICTURE SEARCH
TV/VCR
This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted.
1Start Picture Search
During playback, press [D] or [E] to view at a high speed (in forward/reverse).
2Change searching speed
Press [D] or [E] again to view at super high speed (in the LP/SLP modes only).
Search at this point, hit [SETUP]. |
3 Begin Time Search
By pressing [s / B], the unit will rewind or fast for- ward to the specified point.
The time counts down during the search. When the display shows “0:00”, the tape will start playback automatically.
TO CANCEL DURING TIME SEARCH
Press [C A STOP/EJECT] on the unit or [STOP C]. This will delete the selected time.
- 25 - | EN |