Auto Clock Setting

The Auto Clock function will automatically set the built-in clock (Month, Day, Year and Time) when the TV/VCR is connected to an Antenna or Cable system and it is turned off. As the TV/VCR searches for a receivable station in your area and it receives a broadcast signal for Auto Clock, the Auto Clock needs several minutes to set itself.

AUTO CLOCK SETTING

1Connect the Antenna or Cable system.

•If you use a cable box, turn it on.

2Plug the AC Power cord to the AC outlet.

3Make sure the TV/VCR is turned off.

•If you press the POWER button, the Auto Clock set is not effective.

4Wait at least three minutes and press the POWER button.

5Press the DISPLAY button to check the clock on the screen.

6If the clock is not set, check the Antenna condition. The Auto Clock may not function properly if the reception condition is not good.

4Press the SET/TRACKING + or – button to select your time zone, then press the ENTER button.

ATLANTIC	:	GMT – 4	hours
		(GMT: Greenwich Mean Time)
EASTERN	:	GMT – 5	hours
CENTRAL	:	GMT – 6	hours
MOUNTAIN	:	GMT – 7	hours
PACIFIC	:	GMT – 8	hours
ALASKA	:	GMT – 9	hours
HAWAII	:	GMT – 10 hours
AUTO	:	AUTO SET

5 Press the MENU button until the MENU screen is cleared.

NOTES: • To be able to select the standard time, the clock must first be set by “AUTO CLOCK” once.

•When shipped from factory, the STANDARD TIME option is set to AUTO.

DAYLIGHT SAVING TIME SETTING

You can set the Daylight Saving Time “ON” or “OFF”.

AUTO CLOCK ADJUSTMENT

The Auto Clock Adjustment will be performed at 12:00 PM everyday if you turn off the TV/VCR.

•If you use a cable box and you want Auto Clock adjust- ment to be performed, the cable box must be left on.

•The Auto Clock Adjustment is not effective when there is a difference of more than 5 minutes exists between the built-in clock time and the actual time.

TO SET AUTO CLOCK TO OFF

When shipped from factory the AUTO CLOCK option is set to ON.

But if you do not want Auto Clock set (Adjustment):

1	Turn on the TV/VCR.
2	Press the MENU button.
3	Press the SET/TRACKING + or – button to select the
	SYSTEM SETUP option, then press the ENTER
4	button.
4	Press the SET/TRACKING + or – button to select the

1Press the MENU button. Press the SET/TRACKING + or – button to select the SYSTEM SETUP option, then press the ENTER button.

2Press the SET/TRACKING + or – button to select the DAYLIGHT SAVING TIME option, then press the ENTER button.

3Press the SET/TRACKING + or – button to select “ON” or “OFF”, then press the ENTER button. Press the MENU button until the MENU screen is cleared.

ON: forward one hour

OFF: back one hour

M E N U

TIMER REC SET

TV SETUP

CH SETUP

AUTO REPEAT ON OFF SYSTEM SETUP

·+/–/ENTER/MENUÒ

SYSTEM SETUP

CLOCK SET

LANGUAGE/IDIOMA/LANGUE

AUTO CLOCK ON OFF

STANDARD TIME DAYLIGHT SAVING TIME

·+/–/ENTER/MENUÒ

DAYLIGHT SAVING TIME

OFF

·+/–/ENTER/MENUÒ

5	AUTO CLOCK option.
5	Press the ENTER button to select OFF.
6	Press the MENU button repeatedly to return to the
	normal screen.
	• When the AUTO CLOCK is set to OFF, the Auto Clock
	adjustment does not function.
	• Set the clock manually (see page 14).

TO SET STANDARD TIME

In the rare event that you live within broadcast range of two stations in two different time zones, the TV/VCR may recognize the wrong station for the Auto Clock set. To correct the situation:

1Press the MENU button.

2Press the SET/TRACKING + or – button to select the SYSTEM SETUP option, then press the ENTER button.

3Press the SET/TRACKING + or – button to select the STANDARD TIME option, then press the ENTER button.

When you set the Daylight Saving Time on the first Sunday in April you set to “ON”, and on the last Sunday in October you set to “OFF”.

NOTES: • When shipped from factory, the DAYLIGHT SAVING TIME option is set to OFF position.

•When the clock is not set, Daylight Saving Time setting is not available.

•When there is no Daylight Saving Time in your area, always select OFF position in step 3.