Panasonic PV C923 Manual Clock Setting, TV mode direct channel selection, To Select Catv Channels

TV OPERATION

MANUAL CLOCK SETTING

You must set the date and time manually for Timer Recordings, ON/OFF Timer and Daylight Saving Time if the Auto Clock process did not set them correctly.

EXAMPLE: Setting the clock to “8:30 AM”, 29th (WED) October, 2003.

1To turn on the TV/VCR, press the POWER button.

2Adjust the volume level by pressing the VOL + or – button. The volume level will be indicated on the screen by

1 Press the MENU button.

M E N U

TIMER REC SET

green bars. As the volume level increases, so do the number of

VOLUME 32

	Press the SET/TRACKING + or –
	button to select the SYSTEM
	SETUP option, then press the
	ENTER button.
2	Press the SET/TRACKING + or –
	button to select the CLOCK SET
	option, then press the ENTER
	button.
3	Press the SET/TRACKING + or –
	button to set the month, then press
	the ENTER button.
4	Set the day, year and time as in
	step 3.

After setting the clock, date and time starts functioning automatically.

TV SETUP

CH SETUP

AUTO REPEAT ON OFF SYSTEM SETUP

·+/–/ENTER/MENUÒ

SYSTEM SETUP

CLOCK SET LANGUAGE/IDIOMA/LANGUE

	AUTO CLOCK		ON OFF
	STANDARD TIME
	DAYLIGHT SAVING TIME
·+/–/ENTER/MENUÒ
CLOCK SET
	MONTH	10
	DAY	1	(WED)
	YEAR	2003
	TIME	12	: 00 AM

·+/–/ENTER/CANCEL/MENUÒ

CLOCK SET
MONTH	10
DAY	29	(WED)
YEAR	2003
TIME	8	: 30 AM

bars. If the volume decreases, the number of green bars also decreases.

3 Set the TV/CATV menu option to the appropriate
position (See page 16).
4 Press the Direct Channel selection buttons to select
the channel.
•	TV mode direct channel selection
	When the TV/CATV menu option is in the TV
	position, all channels can be instantly selected by
	using two buttons (for example, to select channel 2,
	press "0", then "2". If you press only "2", channel
	selection will be delayed for a few seconds). For
	channels 10 and above, press the 2 digits in order.
•	CATV mode direct channel selection
	When the TV/CATV menu option is in the CATV
	position, channels can be selected as follows:
•	TO SELECT CATV CHANNELS:
	1-9	Press "0" twice, then 1-9 as needed.
		Example, to select channel 2, press "002".

·+/–/ENTER/CANCEL/MENUÒ

8:30 AM WED

10-12	Press "0", then the remaining 2 digits.
	Example, to select channel 12, press "012".
13-99	Press the 2 digits in order.
	Example, to select channel 36, press "36".
100-125 Press the 3 digits in order.
	Example, to select channel 120, press "120".

NOTES: • After a power failure or disconnection of the power plug, the time display will be lost. In this case, set the present time again if the Auto Clock did not set correctly.

NOTE FOR CHANNELS 1-12:

If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 2 seconds.

CH 012

•To move cursor backward, press the CANCEL button.

NOTES: • If a channel with no broadcast is selected, the sound will automatically be muted.

•If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.

14