30 One-Touch Recording
The
Before you begin, make sure:
●Channels are set up.
●There is a tape in the TV/VCR. The record tab must be intact.
4 Press the STOP/EJECT but- ton on the TV/VCR to stop the OTR.
1
Use the CHANNEL ▲/▼ buttons or the Number buttons to select the channel you want to record.
2 |
|
|
| POWER | MENU | STATUS/EXIT | CLEAR |
|
|
| 1 | 2 | 3 | MEMORY | |
|
|
| 4 | 5 | 6 |
| |
Press the SPEED button until the desired recording speed |
|
|
|
|
| ||
(SP or SLP) appears on the screen. Details are on page 29. |
| 7 | 8 | 9 | CHANNEL | ||
3 |
|
|
|
| 0 |
| ALT.CH |
|
|
|
|
|
| SLEEP/WAKE UP | |
Press the REC(ord)/OTR button repeatedly until the desired |
| VOLUME | MUTE |
| SPEED | ||
recording length appears in the upper right corner of the screen. | 3 | REW/SEARCH |
| PLAY/ | FF/SEARCH | ||
Recording will begin immediately. The RECORD light will appear. | REC/OTR |
| STOP/ | PAUSE/STILL | |||
|
|
|
| ||||
OTR |
| LENGTH 0:30 |
|
|
|
| |
CH12 |
|
|
|
|
|
| |
LENGTH | : | PRESS OTR |
|
|
|
|
|
CANCEL | : | PRESS CLEAR |
|
|
|
|
|
1
2
4
To stop an OTR before recording is finished, press the STOP/EJECT button on the TV/VCR.
Or, press the REC(ord)/OTR button, then press the CLEAR button, then press the STOP/▼ button on the remote con- trol.
Helpful Hints
•To check the time remaining for an OTR after the OTR has been set, press the STATUS/EXIT button.
•To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired recording length appears on the screen.
•You can not pause an OTR.
•To cancel an OTR but continue recording, press the REC(ord)/OTR button, then press the CLEAR but- ton.
•You cannot record if DEFEAT RECORDING is set to ON. Details are on page 36.
•You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the tape.