Timer Recording | Memorex MVT2194 instruction

ONE-TOUCH TIMER

RECORDING (OTR)

The One-Touch Timer Recording feature provides a simple and convenient way to make a timed recording.

EXAMPLE: One-touch Timer Recording for 30 minutes.

1Press the POWER button to turn on the TV/VCR.

2Load a video cassette with the erase prevention tab in- tact.

3Press the SPEED button to select the desired tape speed (SP or SLP). SP or SLP will appear on the screen.

			00:00:00 SP
4 Set the TV/CABLE option to the
appropriate setting (See page 15).

	TV	- VHF/UHF channels
	CABLE	- CABLE TV channels

5Press the Direct Channel Selection buttons or CH M/ ? button to select the channel to be recorded.

6Press the REC/OTR button to

begin recording. Press the button	OTR 0 : 30
again to stop recording after 30	CH 012
again to stop recording after 30
minutes. Each additional press of
the REC/OTR button will increase
recording time as shown below,	INDEX
recording time as shown below,
up to a maximum of 6 hours.
“OTR” will appear on the screen.

TIMER RECORDING

3 Press the ▲ or ▼ button to
press the ENTER button.
select the program position, then

4Press the B or A button to select

the date, then press the ▼ button.	CH

TIMER REC SET

DATE 23(THU)

START 8:30AM

END– – : – –

CH 012

SPEED SP

//// MENU

5Set the start time, end time, channel and tape speed as in

CHstep 4, then press ENTER.

TIMER REC SET
	DATE	23(THU)
	START	7 : 00PM
	END	9 : 30PM
	CH	007
	SPEED	SLP

//// ENTER/MENU

6	To set the timer for another program, press the ▲ or ▼
	button until the number of the second program
	highlighted, then press the ENTER button. Repeat
	steps 4 to 5 to set the second program.
7	Press the TIMER REC button. The T-Rec indicator

ENGLISH

NOTES: • Press the REC/OTR button to increase the time needed for recording (See the chart right).

•To cancel OTR, press the STOP button.

•The TV/VCR channel cannot be changed during recording.

Press	Recording time
once	NORMAL REC
twice	0:30
3 times	1:00
4 times	1:30
5 times	2:00

6 times	3:00
7 times	4:00
8 times	5:00
9 times	6:00
10 times	NORMAL REC

will light. The Timer is programed, when the programed

time is reached, the recording is automatically started.

To cancel timer recording, press the TIMER REC button again and T-Rec indicator will go out.

NOTES: • If programming is performed without a tape in the TV/VCR, or with a tape without an erase prevention tab, the Timer Recording is not possible. If a tape without an erase prevention

TIMER RECORDING

Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month.

EXAMPLE: Program a timer recording for 23rd day, channel

007 (CABLE), 7:00 - 9:30 PM (Tape speed : SLP).

•Load a video cassette with the erase prevention tab intact. The TV/VCR will automatically turn on.

•Set the TV/CABLE selection to the appropriate position (See page 15).

1Press the MENU button.

Press the B or A button to select			CH
Press the B or A button to select
the	option.	AUTO REPEAT	ON
		TIMER REC SET

2Press the ▲ or ▼ button to select

the TIMER REC SET option, then /// MENU press the A button.

tab is in the TV/VCR, the tape will be ejected.

•To record from the external equipment press the B or A button repeatedly until “L” (LINE: from AUDIO/VIDEO IN jack on the front) appears when setting the channel in step 5.

•The VCR section cannot be used while the T-Rec indicator is lit. If you want to use the VCR operation, press the TIMER REC button to deactivate the timer.

•After a power failure or disconnection of the power plug, all programmed recording setting and time display will be lost upon resumption of power. In this case, reset the clock (see page 13) and reprogram any timer recordings.

•If you want to correct the digits while setting, press the ▲ or ▼ button until the item you want to correct, then press the B or A button to correct the desired setting.

5M10421A E P18-25

26/5/04, 10:45