McIntosh owner manual How to Operate the MVP851, con’t

Page 37
Figure 69

How to Operate the MVP851, con’t

Note: Press the Right￿ directional Push-button to highlight the Second Icon from the left, indicating the Elapsed Track Time. Use the Up￿ or Down￿ directional Push-buttons to select the remaining track or disc time.

Access a Specific Time location on a DVD

The MVP851 Front Panel and the On-Screen Displays in- dicate the Elapsed Time of the disc. A specific time on the disc may be accessed at any time by performing the fol- lowing steps. Refer to figures 65 and 68.

1.Press the DISPLAY Push-button to access the DVD- Video or DVD-Audio On Screen Icons.

2.Press the Right￿ directional Push-button to highlight the Third Icon from the left (Clock), which indicates the elapsed time.

3.Using the Numbered Push-buttons enter the desired time, then press the SELECT Push-button.

Note: The MVP851 Front Panel and On-Screen Icon will display first the entered desired time and then the elapsed time from the beginning of the track with a DVD-Audio Disc.

How to Set and Activate Markers

This feature allows establishing up to five different starting places on a disc where playback can start, other than at the beginning of the disc. Refer to figures 68 and 69.

1.Press the DISPLAY Push-button twice to select the second On-

Screen Icon.

2.Press the Right￿

directional Push- button to high-

light the Fifth Icon from the left (Tack), which indi- cates the selected markers.

3.While a disc is playing, press the MARKER Push-but- ton at the time on the disc where you wish play to start, other than at the beginning of the disc. The first aster- isk on the left of the On-Screen Icon will change to the number 1.

4.Press the SELECT push-button to place Marker No. 1 in memory.

5.Repeat steps 3 and 4 to enter any additional Markers. Up to five Markers can be stored in memory.

Note: If you wish to erase a MARKER, use the Left￿ or Right￿ directional Push-buttons to select the desired Active Marker and press the CLEAR push- button.

To start playback from a desired Marker Location perform the following steps:

1. Press the DISPLAY Push-button twice to select the

second On-Screen Icon, if not already displayed On- Screen.

2.Press the Right￿ directional Push-button to highlight the Fifth Icon from the left (Tack), which indicates the selected markers.

3.Using the Left￿ or Right￿ directional Push-buttons to select the desired Active Marker Location, then press the SELECT Push-button.

4.Press the DISPLAY Push-button twice to exit the On- Screen Icon.

DVD-Video Repeat

This allows repeating a DVD Chapter or the entire movie on a continuous basis. Refer to figures 68 and 69.

1.Press the DISPLAY Push-button twice to access the second On Screen Icon.

2.Press the Right￿ directional Push-button to highlight the Third Icon from the left (Loop).

3.Press the Up￿ or Down￿ directional Push-buttons to select the desired Repeat Mode C (Chapter Repeat) or T (Title Repeat).

Note: A scrolling text message of the repeat mode status will appear on the Front Panel Alphanumeric Display.

4.Press the DISPLAY Push-button twice to exit the On- Screen Icon.

Note: An optional method to activate the Repeat Mode is to press the REPEAT MODE Push-button on the Remote Control.

DVD-Audio Repeat

This allows repeating a DVD Track or Tracks on a continu- ous basis. Refer to figures 68 and 69.

1.Press the DISPLAY Push-button twice to access the second On Screen Icon.

2.Press the Right￿ directional Push-button to highlight the Third Icon from the left (Loop).

3.Press the Up￿ or Down￿ directional Push-buttons to select the desired Repeat Mode G (Group Repeat) or T (Title Repeat).

Note: A scrolling text message of the repeat mode status will appear on the Front Panel Alphanumeric Display.

4.Press the DISPLAY Push-button twice to exit the On- Screen Icon.

Note: An optional method to activate the Repeat Mode is to press the REPEAT MODE Push-button on the Remote Control.

CD Repeat

This feature allows the repeating of a specfic CD Track or

37

Image 37
Contents MVP851 DVD Audio / Video Player Luokan 1 Laserlaite Klass 1 Laser Apparat Important Safety Instructions Table of Contents Customer ServiceThank You Please Take a MomentConnector Information Performance Features Introduction and Performance FeaturesDimensions MVP851 Dimensions Custom Cabinet Cutout InstallationMVP851 Rear Panel Connections A McIntosh A/V Control Center How to Connect Control, Analog and Digital AudioHow to Connect Video and AC Power OFF Front Panel Indicators, Push-Buttons and SwitchFront Panel Display Remote Control Push-Buttons How to Operate the Remote Control How to Operate the Setup Mode Video Preference Default Settings Setup and Default Settings Setup Mode Default SettingsMain Settings for MULTI-CHANNEL Settings forHow to Set Disc Language SETUP, con’t How to Set Ratings SETUP, con’t How to Set Video Display Modes SETUP, con’t Loudspeaker Size How to Set Audio ParametersLoudspeaker Time Delay How to Set Audio Parameters, con’t Loudspeaker Volume Level Loudspeaker Size Loudspeaker Time DelayLoudspeaker Levels Push-button. Refer to figure How to Set Audio Parameters, con’t How to Set the Display Settings SETUP, con’t How to Set the Other Settings How to Operate the MVP851 How to Operate the MVP851, con’t DVD-Video DVD-Audio How to Operate the MVP851, con’t How to Operate the MVP851, con’t How to Operate the MVP851, con’t How to Operate the MVP851, con’t How to Operate the MVP851, con’t How to Operate the MVP851, con’t How to Operate the MVP851, con’t U1 Menu U2 Menu U4 Menu General Specifications Specifications Audio SpecificationsVideo Specifications NtscPacking Instructions